Bedienungsanleitung Siemens ET875SC11D (Seite 8 von 12) (Englisch)

530809

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

Timer

The timer can be used in two different ways:

■ To switch a hotplate off automatically

■ As a kitchen timer

Automatic hotplate switch-off

Enter a cooking time for the relevant hotplate. When the

cooking time has elapsed, the hotplate switches off

automatically.

Setting a cooking time

The hotplate must be switched on.

1. Touch the 0 symbol for the required hotplate. ‹‹ lights up

in the timer display and the

x display appears.

2. Touch the desired preset in the range of settings. The

possible presets from left to right are 1, 2, 3..... to 10 minutes.

3. Slide your finger along the settings range repeatedly, within

10 seconds, until the desired cooking time is reached.

The duration set is displayed for 10 seconds and then starts to

count down.

Automatic setting

If you touch settings range presets 1 to 5 for a longer time, the

cooking time automatically counts back down to one minute.

If you touch settings range presets 6 to 10 for a longer time,

the cooking time automatically counts up to 99 minutes.

When the cooking time has elapsed

When the cooking time has elapsed, the hotplate switches off.

You will hear a signal and

‹‹ lights up in the display for

10 seconds. The

x display lights up brightly. Touch the

hotplate settings range. The display goes out and the audible

signal ceases.

Changing or cancelling the duration

Touch the

0 symbol for the required hotplate. Change the

cooking time or set to

‹‹ in the settings range.

Automatic timer

You can use this function to preselect a cooking time for all

hotplates. Each time a hotplate is switched on, the preselected

cooking then counts down. When the cooking time has

elapsed, the hotplate switches off automatically.

You can find out how to switch on the automatic timer in the

Basic settings section.

Note: You can change the cooking time for a hotplate or switch

off the automatic timer for the hotplates.

Touch the

0 symbol for the required hotplate. Change the

cooking time or set to

‹‹ in the settings range.

Kitchen timer

You can use the kitchen timer to set a time of up to 99 minutes.

It runs independently of all the other settings. The hob must be

switched on.

You can activate the kitchen timer on every hotplate that is

turned off.

Setting the kitchen timer

1. Touch the 0 symbol for the hotplate. The U display for the

kitchen timer lights up.

‹‹ lights up on the timer display.

2. Set the desired time in the settings range.

The timer starts counting down after a few seconds.

When the cooking time has elapsed

A signal sounds once the time has elapsed.

‹‹ lights up on

the timer display. The

U display for the kitchen timer lights up

brightly. After 10 seconds, the display switches off.

Changing the time

Touch the

0 symbol for the required hotplate. Change the time

or set to

‹‹ on the settings range.

Note: If you have switched on the kitchen timer, the associated

hotplate is locked. You must first switch off the kitchen timer

and then set the hotplate.

Automatic time limit

If a hotplate is in use for a long time without the setting being

changed, the automatic time limit is activated.

The hotplate stops heating.

” ‰ and the •/œ residual heat

indicator flash alternately on the hotplate display.

The display goes out when you touch any control. You can

make new settings.

When the time limit is activated depends on the heat setting

selected (1 to 10 hours).

Wipe protection

If you wipe over the control panel while the hob is switched on,

settings may be altered.

To prevent this from happening, your hob has a wipe protection

function. Touch the

# symbol. A signal sounds. The control

panel is locked for 30 seconds. You can now wipe over the

control panel without altering any settings.

Note: The main switch is excluded from the wipe protection

function. You can switch off the hob at any time.

PLQPLQ

 

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Siemens ET875SC11D Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Siemens ET875SC11D

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info