Bedienungsanleitung Siemens EX607LYV5E (Seite 37 von 48) (Englisch)

788208

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

en Hood connection

eHood connection

Ho o d c onnect i on

You can connect this appliance to a suitable extractor

hood and then control the functions of the hood via your

hob.

You have various options for connecting the appliances

together:

Home Connect

Two appliances can be connected using the Home

Connect app provided that both of them are Home

Connect-compatible.

Both appliances can be controlled via the app and via

the control panel.

Refer to the Home Connect documents supplied and

the Home Connect section for more information.

~ "Home Connect" on page 31

Connecting appliances directly

If the appliance is connected directly to an extractor

hood, the extractor hood can be controlled via the hob.

It is then not possible for either of the appliances to

connect to your home network or to the app. Both

appliances can be controlled via the control panel.

Connecting appliances via your home network

Use this type of connection if neither or one of the two

appliances is connected to the Home Connect app.

If the appliances are connected to each other via your

home network, you can use both the hood controls and

Home Connect to operate the hob.

Notes

■Make sure you follow the safety instructions in the

instruction manual for your extractor hood and that

these are complied with even when operating the

appliance via the hood controls on the

hob.~ "Important safety information" on page 5

■If the appliance is being operated by means of the

controls on the extractor hood, this mode of

operation always has priority. It is not possible to use

the hood controls on the hob during this time.

■In networked standby mode, your appliance requires

a maximum of 2 W.

Setting up

To set up the connection between the hob and the

extractor hood, the hob must be switched on.

Connecting directly

Make sure that the extractor hood is switched off.

For more information refer to the section entitled

"Connecting to the hob" in the instruction manual for

your extractor hood.

Note:

If you connect your hob directly to the extractor hood, it

cannot be connected to your home network as well and

you will not be able to use Home Connect.

1. Switch on the hob.

2. Touch and hold the 0 symbol for four seconds.

The product information is displayed.

3. Touch the 0 symbol repeatedly until the ™‚‡

setting appears.

‹ lights up in the hotplate display.

4. Set the value ‚ in the settings area.

‚ flashes in the hotplate display.

5. You have two minutes to initiate the connection

process on the extractor hood.

Once the hob is connected to the extractor hood, the

value „ appears in the hotplate display. After you exit

the settings menu, the symbols for the hob-based hood

controls are displayed in the hob's control panel.

Hood connection en

Connecting via your home network

You require a router that has WPS functionality.

You require access to your router.If you do not have

this, follow the steps for "Direct connection".

When you begin, make sure that the extractor hood is

connected to the app or is on your home network.

1. Switch on the hob.

2. Touch and hold the 0 symbol for four seconds.

The product information is displayed.

3. Touch the 0 symbol repeatedly until the ™‚‡

setting appears.

‹ (not connected) or ƒ (connected to home

network) will be lit on the hotplate display.

4. Set the value ‚ in the settings area.

‚ flashes in the hotplate display.

5. If the appliance is not yet connected to your home

network, press the WPS button on the router within

the next 2 minutes.

The hob will be connected to your home network

and the value ƒ will appear on the hotplate display.

The process of connecting to the extractor hood

starts automatically and is active for 2 minutes.

If the appliance is already connected to your home

network, proceed to the next step.

6. Initiate the process for connecting to the extractor

hood.

Once the hob is connected to the extractor hood, the

value „ appears in the hotplate display. After you exit

the settings menu, the symbols for the hob-based hood

controls are displayed in the hob's control panel.

Note:

Connection can only be established when both

appliances are connected to your home network and

the connection process has been initiated for both of

them. If the connection process has already timed out

for one of the two appliances, try to connect again

(basic settings, ™‚‡ setting).

Disconnecting from the network

Di s c onnect i ng f r om t he net wor k

You can reset the connections you have saved for your

home network and extractor hood at any time.

1. Switch on the hob.

2. Touch and hold the 0 symbol for four seconds.

The product information is displayed.

3. Touch the 0 symbol repeatedly until the ™‚‡

setting appears.

4. Set the ‹ value on the control panel.

The connection has been restored.

Control the hood via the hob

In the basic settings of your hob you can adjust the

behaviour of your extractor hood depending on the

switch-on/off of the hob or individual cooking zones.

~ "Hood control settings" on page 38

You can select other settings using the control panel.

Setting the fan

Activation

1. Touch the I symbol.

2. Select the fan level.

You can choose between the levels 1, 2 and 3. To

select the intensive levels, touch buttons 4 or 5, or

touch the & button repeatedly until the required

intensive level is set.

The fan has been activated.

Deactivating

1. Touch the I symbol.

2. Select fan setting 0.

The fan has been deactivated.

Setting automatic mode

Activation

Touch the I symbol until the ‘ symbol appears on the

control panel.

The fan starts up automatically when steam is

produced.

Deactivating

Touch the I symbol until the ‘ symbol goes out, or

select another fan level.

Automatic mode is deactivated.

Setting the hood lighting

You can switch the hood light on and off via the hob's

control panel.

Touch the = symbol.

Siemens EX607LYV5E Seite 37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Siemens EX607LYV5E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info