Bedienungsanleitung Siemens EX607LYV5E (Seite 39 von 48) (Englisch)

788208

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

en Cleaning

Hood control settings

Ho o d c ont r ol s et t i ngs

You can adapt the hood controls to suit your needs at

any time.

Note:

The ™‚‰, ™ƒ‹, ™ƒ‚ and ™ƒƒ settings are only

displayed if the appliance is connected to an extractor

hood.

DCleaning

Cl eani ng

Suitable maintenance and cleaning products can be

purchased from the after-sales service or in our e-Shop.

Hob

Cleaning

Always clean the hob after cooking. This will prevent

food deposits from becoming burned on. Only clean the

hob after the residual heat indicator has gone out.

Clean the hob with a damp dish cloth and dry it with a

cloth or towel to prevent limescale build-up.

Only use cleaning agents that are suitable for this type

of hob. Observe the manufacturer's instructions on the

product packaging.

Never use:

■Undiluted washing-up liquid

■Cleaning agents designed for dishwashers

■Abrasive cleaners

■Harsh cleaning agents, such as oven spray and

limescale remover

■Scouring pads

■High-pressure cleaners or steam jet cleaners

Stubborn dirt is best removed with a glass scraper,

available from retailers. Observe the manufacturer's

instructions.

You can obtain a suitable glass scraper from customer

services or through our online shop.

Using a special sponge for cleaning glass-ceramic

hobs achieves a great cleaning result.

Note: Do not use any cleaning agents while the hob is

still hot. This may mark the surface. Make sure that any

residue left by cleaning agents is removed.

Hob surround

To prevent damage to the hob surround, observe the

following instructions:

■Only use warm soapy water

■Wash new dish cloths thoroughly before use.

■Do not use harsh or abrasive cleaning agents.

■Do not use a glass scraper or sharp objects.

Symbol Function

™‚‡ Hob-hood connection

‹Not connected / disconnect.

‚Connect.

ƒConnected to home network (WLAN).

„Connected to extractor hood.

™‚‰ Automatic fan switch-on

‹Switched off.

The hood must be switched on manually if needed.

‚Switched on in automatic mode.*

In automatic mode, the hood switches itself on when a

cooking zone is switched on.

ƒSwitched on in manual mode.

The hood switches itself on with a default setting when a

cooking zone is switched on.

™ƒ‹ Fan run-on

‹The fan switches itself off when the hob is switched off.

‚Switched on in automatic mode.*

ƒSwitched on with standard fan run-on.

„No change in settings.

™ƒ‚ Switch light on automatically

‹Switched off.

‚Switched on.*

The light switches itself on when the hob is switched on.

™ƒƒ Switch light off automatically

‹Switched off.*

‚Switched on.

The light switches itself off when the hob is switched off.

* Basic setting

Potential marks

Limescale and water

marks

Clean the hob as soon as it has cooled down.

You can use a cleaning agent suitable for

glass-ceramic hobs.*

Sugar, rice starch or

plastic

Clean immediately. Use a glass scraper. Cau-

tion: Risk of burns.*

* Then clean with a damp dish cloth and dry with a cloth or towel.

Frequently Asked Questions (FAQ) en

{Frequently Asked

Questions (FAQ)

Fr equent l y As k e d Quest i ons ( F AQ)

Use

Why can't I switch on the hob and why is the childproof lock symbol lit?

The childproof lock is now active.

You can find information about this function in section ~ "Childproof lock"

Why are the indicators flashing and why can I hear a signal tone?

Remove any liquid or remnants of food from the control panel. Remove any objects from the control panel.

You can find instructions on how to deactivate the audible signal in the section on ~ "Basic settings"

Why can the frying sensor not be activated?

The appliance's maximum power consumption is achieved or the power manager function has been activated. Switch off or reduce the

power levels of the active hotplates.

You can find further information about this function in section ~ "Power manager" on page 31

Noises

Why I can hear noises while I'm cooking?

Noises may be generated while using the hob depending on the base material of the cookware. These noises are a normal part of induc-

tion technology. They do not indicate a defect.

Possible noises:

A low humming noise like the one a transformer makes:

Occurs when cooking at a high heat setting. The noise disappears or becomes quieter when the heat setting is reduced.

Low whistling noise:

Occurs when the cookware is empty. This noise disappears when water or food is added to the cookware.

Crackling:

Occurs when using cookware made from different layers of material or when using cookware of different sizes and different materials at

the same time. The loudness of the noise can vary depending on the quantity of food being cooked or the cooking method.

High-pitched whistling noises:

Can occur when two hotplates are used at the highest heat setting at the same time. The whistling noises disappear or become quieter

when the heat setting is reduced.

Fan noise:

The hob is equipped with a fan that switches on automatically at high temperatures. The fan may continue to run even after you have

switched off the hob if the temperature detected is still too high.

Siemens EX607LYV5E Seite 39

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Siemens EX607LYV5E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info