Bedienungsanleitung Siemens EX907KXX5E (Seite 12 von 60) (Englisch)

790749

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

en Operating the appliance

Cooking modes menu

The hob has a number of different cooking modes.

To navigate to the Cooking modes menu, select the

cooking zone and touch the active cooking mode.

Residual heat indicator

The hob has a residual heat indicator for each hotplate.

This indicates that a hotplate is still hot. Do not touch

the hotplate while the residual heat indicator f is still lit

or immediately after it goes out.

When the hotplate is switched off, the residual heat

indicator will light up. Even after the hob has been

switched off, the residual heat indicator will remain lit as

long as the hotplate is still warm.

1Operating the appliance

Oper at i ng t he appl i anc e

This chapter explains how to set a hotplate. The table

shows heat settings and cooking times for various

meals.

First-time use

When you switch on the appliance for the first time, the

menu for implementing the initial settings appears in the

display panel.

The main screen is then displayed.

Note: You can change the language and any other

setting at any time. You can find further information on

selecting the language in section ~ "Basic settings".

Switching the hob on and off

Switch the hob on and off using the main switch.

To switch on: Touch the # sensor. A signal sounds and

the touch display lights up. After a short switch-on time,

the hob will be ready for operation.

To switch off: Touch the # symbol until the indicator

beside the main switch goes out. The residual heat

indicator remains lit until the cooking zones have

cooled down sufficiently.

Notes

■The hob automatically switches off if all cooking

zones have been switched off for more than

30 seconds.

■The selected settings are stored for 10 minutes after

the hob has been switched off. If the hob is switched

back on within this time, the previous settings are

retained. Section ~ "Basic settings" contains

information about changing the time in which the

selected settings are saved.

Setting the cooking zone

Set the required power setting from 1 to 9.

Power setting 1 = lowest setting.

Power setting 9 = highest setting.

Each power setting has an intermediate level.

Notes

■To protect the fragile parts of your appliance from

overheating and electrical overloading, the hob may

temporarily reduce the power.

■In order to prevent the appliance from producing

excess noise, the hob may temporarily reduce the

power.

Cooking mode Function

” Heat settings Allows you to select the heat setting for

the cooking zone.

» Cooking functions The wireless cooking sensor automati-

cally detects the temperature as cooking

progresses.

Note: This function will be ready to use

once the wireless cooking sensor is con-

nected to the control panel.

Õ Frying sensor The hob automatically detects the tem-

perature as frying progresses.

ÿ powerMove The temperature is adjusted by changing

the position of the cookware on the cook-

ing zones.

/ Dish assistant A preset list of dishes for braising and

boiling.

3RZHU

OHYHO

6ZLWFKRII

WLPHU



Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Siemens EX907KXX5E Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Siemens EX907KXX5E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info