Bedienungsanleitung Siemens EY645CXB1E (Seite 14 von 24) (Englisch)

790748

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

en Time-setting options

OTime-setting options

Ti me- set t i ng opt i ons

Your hob has two timer functions:

■Programming the cooking time

■Kitchen timer

Programming the cooking time

The hotplate automatically switches off after the time

that is set has elapsed.

Setting procedure:

1. Select a heat setting for the desired hotplate.

2. Touch the 0 symbol. Ú lights up in the display for

the hotplate. ‹‹ appears in the timer display.

3. Touch the @ or A symbol. The basic setting

appears:

@ symbol: 30 minutes.

A symbol: 10 minutes.

4. Use the @ or A symbol to select the required

cooking time.

After a few seconds, the time begins to elapse.

Notes

■The same cooking time can be set automatically for

all hotplates. The set time for each of the hotplates

counts down independently.

You can find information on automatically

programming the cooking time in section ~ "Basic

settings"

■If the flexible cooking zone is selected as the only

hotplate, the set time for the entire cooking zone is

the same.

Changing or deleting the time

Touch the 0 symbol repeatedly until the Ú indicator for

the desired hotplate lights up. Change the cooking time

or set it to ‹‹ using the @ or A symbol.

Once the time has elapsed

The hotplate switches off. A beep sounds and in the

time program function display ‹‹ appears for

10 seconds. The Ú indicator on the hotplate lights up.

Pressing the 0 symbol turns off the indicators and

stops the beeping.

Notes

■If a cooking time has been set for several hotplates,

the cooking time that was set last appears in the

timer display.

■To select the remaining cooking time for a different

hotplate, touch the 0 symbol repeatedly until the

indicator for the desired hotplate lights up.

■You can set a cooking time of up to 99 minutes.

The kitchen timer

You can use the kitchen timer to set a time of up to 99

minutes.

This functions independently from the hotplates and

from other settings. This function does not automatically

switch off a hotplate.

Setting procedure

1. The kitchen timer can be set in two different ways:

– If a hotplate has been selected, touch the

0 symbol repeatedly until the Ú indicator beside

the V symbol lights up.

– If no hotplate has been selected, touch the

0 symbol. The Ú indicator beside the V symbol

lights up.

‹‹ appears on the timer display.

2. Touch the @ or A symbol. The basic setting is

displayed.

@ symbol: 10 minutes.

A symbol: 05 minutes.

3. Use the @ or A symbol to set the required time.

After a few seconds, the time begins to count down.

Changing or deleting the time

Touch the symbol 0 repeatedly until the Ú indicator

lights up beside the V symbol. Change or set the time

to ‹‹ using the @ or A symbol.

Once the time has elapsed

A warning signal sounds. ‹‹ is displayed on the time

program function display. After 10 seconds the

indicators turn off.

Pressing the 0 symbol turns off the indicators and

stops the beeping.

 

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Siemens EY645CXB1E Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Siemens EY645CXB1E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info