Bedienungsanleitung Siemens HN678G4W1 (Seite 15 von 72) (Englisch)

607936

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

Operating the appliance en

Switching the appliance on

Use the On/Off button to switch the appliance on.

The on/off symbol above the button is illuminated in

blue.

The Siemens logo appears in the display, and then a

type of heating and a temperature.

Note: You can specify which operating modes should

appear after the appliance is switched on in the basic

settings.

Switching off the appliance

Use the On/Off button to switch off the appliance.

The lighting above the button goes out.

A set function is cancelled.

The time appears in the display.

Note: You can set whether or not the time should be

displayed when the appliance is switched off in the

basic settings.

Starting or interrupting operation

To start operation or to interrupt an operation which has

started running, press the Start/Stop button. The

cooling fan may continue to run after an operation is

interrupted.

Press the On/Off button to delete all settings.

If you open the cooking compartment door during

operation, operation is interrupted. Close the cooking

compartment door to resume operation.

Tip: You can change this setting in the basic settings.

~ "Basic settings" on page 18

Selecting an operating mode

When you select an operating mode, the appliance

must be switched on.

1. Press the menu button.

The operating modes menu opens.

2. Touch the required operating mode.

Depending on the operating mode, different options

are available.

3. Use the rotary selector to change the selection.

Depending on the selection, change further settings.

4. Use the start/stop button to start.

The elapsed time appears in the display. The

settings and progress line can be seen.

Setting the type of heating and temperature

After the appliance is switched on, the set suggested

type of heating appears with the temperature. You can

start this setting immediately with the Start/Stop button.

If you want to set another type of heating, proceed as

follows.

For other settings, you can change the values as

follows:

Example in the picture: Top/bottom heating at 180 °C.

1. Use the rotary selector to change the type of

heating.

2. Touch the suggested temperature.

3. Use the rotary selector to change the temperature.

4. Press the Start/Stop button to start.

The set type of heating and the temperature are shown

on the display.

Rapid heat up

You can use the c button to heat up the cooking

compartment particularly quickly.

The rapid heat up function is not possible for all types of

heating.

Suitable types of heating:

To ensure an even cooking result, do not place your

food in the cooking compartment until rapid heat up is

complete.

4D hot air

Top/bottom heating

Intensive heat









7RSERWWRP

KHDWLQJ



&

$GGHGVWHDP



7RSERWWRP

KHDWLQJ



PLQV

&

$GGHGVWHDP



7RS

ERWWRPKHDWLQJ



PLQV

&

$GGHGVWHDP

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Siemens HN678G4W1 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Siemens HN678G4W1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info