Bedienungsanleitung Siemens HN678G4W1 (Seite 17 von 72) (Englisch)

607936

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

Childproof lock en

2. Set the cooking time using the rotary selector.

3. Press the Start/Stop button to start.

You can see the x cooking time counting down in

the status bar.

The cooking time has elapsed

A signal sounds. The oven stops heating. "Finished"

appears in the status bar. You can cancel the audible

signal early using the 0 button.

Cancelling the cooking time

Press the

0 button to open the time-setting options

menu. Turn the time back. The type of heating and

temperature set are shown in the display.

Changing the cooking time

Press the

0 button to open the time-setting options

menu. Change the cooking time using the rotary

selector.

End time

If you change the end time, please remember that

easily spoiled foods must not be allowed to remain in

the cooking compartment for too long.

Prerequisite: The selected operation has not already

begun. A cooking time has been set. The time-setting

options menu 0 is open.

Example in the picture: You put the dish in the cooking

compartment at 9:30. It takes 45 minutes to cook and

will be ready at 10:15, but you would like it to be ready

at 12:45 instead.

1. Touch the "End y" field.

The end time is displayed.

2. Using the rotary selector, set a later end time.

3. Confirm with the Start/Stop button.

The oven is on standby. The operation starts at the

appropriate time. You can see the cooking time

counting down in the status bar.

The cooking time has elapsed

A signal sounds. The oven stops heating. "Finished"

appears in the status bar. You can cancel the audible

signal early using the 0 button.

Correcting the end time

This is possible if the oven is in standby. Use the 0

button to open the time-setting options menu, touch

"End y" and use the rotary selector to correct the end

time. Press the 0 button to close the menu.

Cancelling the end time

This is possible if the oven is on standby. To do so,

open the time-setting options menu using the 0 button.

Touch "End y" and reset the End time using the rotary

selector. The cooking time immediately starts to count

down.

AChildproof lock

Childproof lock

Your appliance is equipped with a childproof lock so

that children cannot switch it on accidentally or change

any settings.

Activating and deactivating

You can activate and deactivate the childproof lock

when the appliance is switched on or off.

In each case, press the / button for approx. 4

seconds. A confirmation note appears in the display

and the / symbol appears in the status bar.

The appliance door is locked

In the basic settings, you can change the settings so

that the appliance door is also locked in addition to the

control panel.

The appliance door locks if the temperature in the

cooking compartment reaches approx. 50 °C. The H

symbol is displayed in the status bar. When the oven is

switched off, the appliance door locks immediately if the

childproof lock has been activated.

ꑖ

PLQV

ꑘ7LPHU

ꑗ



ꑘ7LPHU

ꑗ

ꑖ

PLQV



ꑘ7LPHU

ꑗ

ꑖ

PLQV



'KRWDLU



$SSOLDQFHZLOOVWDUWLQKPLQ

&

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Siemens HN678G4W1 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Siemens HN678G4W1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info