Bedienungsanleitung Siemens KM40FSB20 (Seite 29 von 37) (Deutsch, Englisch)

635039

Zoom out

Zoom in

Vorherige Seite

1/37

Nächste Seite

Special functions

[eco]

This function switches the appliance to energy-saving

mode.

The appliance automatically sets the following

temperatures:

■ refrigerator compartment: + 6 °C

■ cool-fresh compartment: 0 °C

■ freezer compartment: - 16 °C

[eco] switch on/off

1. Press 7 mode button.

2. Keep pressing the 7 mode button until "eco" is

marked with an arrow on the display panel.

3. Confirm the selection by pressing 13.

If a bar appears at the side next to the selection, the

function is switched on.

[fresh]

With the fresh mode [fresh] food remains fresh even

longer.

The appliance automatically sets the following

temperatures:

■ refrigerator compartment: + 4 °C

■ cool-fresh compartment: 0 °C

■ freezer compartment: - 18 °C

[fresh] switch on/off

1. Press 7 mode button.

2. Keep pressing the 7 mode button until "fresh" is

marked with an arrow on the display panel.

3. Confirm the selection by pressing 13.

If a bar appears at the side next to the selection, the

function is switched on.

[vacation]

If leaving the appliance for a long period of time, you

can switch the appliance over to the energy-saving

holiday mode.

m Caution

Do not store any food in the refrigerator compartment

during this time!

The appliance automatically sets the following

temperatures:

■ refrigerator compartment: + 14 °C

■ cool-fresh compartment: + 14 °C

The freezer compartment keeps the set temperatures.

[vacation] switch on/off

1. Press 7 mode button.

2. Keep pressing the 7 mode button until "vacation" is

marked with an arrow on the display panel.

3. Confirm the selection by pressing 13.

If a bar appears at the side next to the selection, the

function is switched on.

[lock]

The [lock] function can be used to safeguard the

appliance from unintentional use.

[lock] switch on/off

1. Press 7 mode button.

2. Keep pressing the 7 mode button until "lock" is

marked with an arrow on the display panel.

3. Confirm the selection by pressing 13.

If a bar appears at the side next to the selection, the

function is switched on. Settings via the buttons are

no longer possible.

Press the "alarm/lock" button 14 for three seconds

to cancel the function again.

timer

You can use this function to set a period of time of 1–

99 minutes. A signal reminds you, e.g. when food is to

be taken out of the compartment after a certain time.

A value of 20 minutes has been preset at the factory.

m Caution

Drinks bottles may crack if they are stored for longer

than 20 minutes in the freezer compartment.

Setting and starting the timer

1. Press 9 to select the timer.

2. Press the setting buttons +/- 11 to set the required

number of minutes.

3. Press 13 to confirm the setting and start the timer.

The remaining number of minutes is displayed on the

timer 10 display panel.

An alarm signal will sound after the number of

minutes set has expired.

4. End the alarm signal with the "alarm/lock" button 14.

The timer function has ended.

Usable capacity

Information on the usable capacity can be found inside

your appliance on the rating plate (see diagram at

chapter “Customer service”).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Siemens KM40FSB20 Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Siemens KM40FSB20

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info