32
Installation
5. Carefully pull the upper flue duct
upwards and screw the sides to the
fixing bracket with 2 screws.
4. Insert the complete flue duct at an angle
and swivel to the rear..
Note the surrounding guideway.
3. Clip the screen switch into the lower flue
duct from the inside.
6. Test all button functions for the screen
and check that a CD/DVD can be
inserted into the drive.
If required, check that the keypads have
been fitted correctly.
9. Insert the grease filter (refer to
Operating Instructions).
4. Clean the glass pane on the inside of
the flue duct and the screen with a soft
non-linting cloth.
5. Insert the upper flue duct (slots
downwards) into the lower flue duct.
ṇ Protect the cover panels from
scratches, for example by laying the
template used for marking the wall over
the top edge of the lower section.
Installing the flue duct:
1. Carefully remove all protective film.
ṇ Avoid damage to the sensitive
surface.
Warning: The interior walls of the flue
panelling can have sharp edges – Risk of
injury –.
We recommend that you wear gloves when
installing.
2. Clip the keypad sideways into the lower
flue duct.
