563725
22
Zoom out
Zoom in
Vorherige Seite
1/126
Nächste Seite
18
en
Problem Cause Remedy
Grinding unit does not
grind the beans�
Beans are not falling into
the grinding unit (beans too
oily)�
Gently tap the bean container
(1)� Change the type of coffee if
necessary
When the bean container (1) is
empty, wipe it with a dry cloth
No hot water dispensed� The milk frother (6) is
soiled�
Clean the milk frother (6), see
“Maintenance and daily cleaning”�
Too little or no milk froth� The milk frother (6) is
soiled�
Clean the milk frother (6), see
“Maintenance and daily cleaning”�
Milk unsuitable for frothing� Use milk with a fat content of at
least 1�5%�
The milk frother (6) is not
assembled correctly
Wet the milk frother parts and
press together rmly.
Build-up of limescale in the
appliance�
Descale the appliance as
described in the instructions�
Coffee dispensing slows
to a trickle or stops
completely
The grind setting is too ne
or the pre-ground coffee is
too ne.
Adjust the grinding unit to a
coarser setting or use coarser
pre-ground coffee�
Build-up of limescale in the
appliance�
Descale the appliance as
described in the instructions�
Coffee has no “crema”� Unsuitable type of coffee� Use a type of coffee with a higher
proportion of robusta beans�
The beans are no longer
fresh�
Use fresh beans�
The grind setting is not
suitable for the beans�
Adjust the grind setting to ne.
Coffee is too “acidic”� The grind setting is too
coarse or the pre-ground
coffee is too coarse�
Adjust the grinding unit to a ner
setting or use ner pre-ground
coffee�
Unsuitable type of coffee� Use a darker roast�
Coffee is too “bitter”� The grind setting is too ne
or the pre-ground coffee is
too ne.
Adjust the grinding unit to a
coarser setting or use coarser
pre-ground coffee�
Unsuitable type of coffee� Change the type of coffee�
The water lter does not
stay in position in the
water tank (16)�
The water lter is not tted
correctly
Firmly press the water lter
straight down into the tank
connection�
If you are unable to solve the problem, please call the hotline.
You will nd the telephone numbers at the back of these instructions.
Simple troubleshooting
22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Siemens TE501203 EQ 5 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info