Steam for heating drinks
!
Risk of burns
The nozzle gets very hot. Do not touch the
metal parts.
The appliance must be ready for use.
8 all the
way up.
h. The LED will
i The appliance will now heat up for
approx. 20 seconds.
8 deep into the liquid
you want to heat.
J
dial 6 to g/h.
!
Risk of scalding
When the dial 6 is set to g/h, the nozzle 8
may sputter a little. Escaping steam is very
hot and may cause liquid to sputter. Do not
touch the nozzle 8 or point it at anyone.
6
back to “O”.
i To generate more steam, press the steam
button h again and repeat the whole
process.
Note: When the nozzle 8 has cooled down,
to remove.
Maintenance and daily
cleaning
!
Risk of electric shock!
Unplug the appliance before cleaning it.
Never immerse the appliance in water.
Do not use a steam cleaner.
damp cloth. Do not use scouring agents.
-
ately. Such residue can cause corrosion.
11 with water
only.
coffee grounds 17 and residual water 18.
holders).
21
and remove any coffee residues. Close
the doors.
Note: If the appliance is cold when switched
on, or if it is switched to “eco” mode after
other words the system cleans itself.
Nozzle 8 for hot water/steam
8 from the steam
pipe.
Fig. D).
a soft brush. Clean the tip of the nozzle
8/c with a blunt needle.
Brewing unit
The brewing unit can be removed for
cleaning (Fig. E).
eco button to start the
automatic rinse cycle.
1 to 0.
21 to the brewing unit 22.
22a down and push
the handle 22b up until you hear it
engage.
22 by the handle,
remove carefully, and rinse under running
water. Do not use cleaning agents. Do not
place in the dishwasher.
clean it with a damp cloth.
22 all the way
into the appliance.
22a down and push
the handle 22b down as far as it goes,
until you hear it engage. The brewing unit
is now secure.
