Service programme:
Combined cleaning and
descaling process
If the “S” LED lights up while the appliance
is on, the service programme must be run
immediately to clean and descale the appli-
ance. If the service programme is not run as
instructed, the appliance may be damaged.
Specially developed descaling (Order
No. 310451) and cleaning agents (Order
No. 310575) can be obtained from our
customer service department.
Warning
Each time you run the service programme,
follow the instructions for using the cleaning
and descaling agents.
Never interrupt the service programme!
Do not drink the liquids!
Never use vinegar or vinegar-based
products!
Never put descaling tablets or other
descaling materials into the duct for
cleaning tablets!
i The “S-
gramme is running (approx. 40 minutes).
Important:
If there is a filter in the water
tank, it must be removed before the service
programme is run.
Starting the service programme
“eco” mode.
17 and 18.
5 for at
least 5 seconds.
The S and the
appliance rinses the coffee dispenser
through twice.
17.
The steam button LED h
H LED lights up.
one cleaning tablet in the duct 13.
add descaling agent and dissolve
completely (total liquid 0,5 litres).
or pour prepared descaling mixture into the
water tank (total liquid 0,5 litres).
h.
The descaling process begins. Duration
approx. 10 minutes. The descaling
18.
The J
litres) under the nozzle 8.
6 to g/h. The descaling
process begins. Duration approx.
into the container.
The I LED lights up.
17.
The steam LED h
11,
with fresh water up to the “max” mark and
reinsert.
litres) under the nozzle 8.
h. The cleaning
container.
The J LED lights up.
6 to “O”. The cleaning
process begins. Duration approx. 10
grounds tray 17 inside the appliance, then
out through the coffee outlet.
The I LED lights up.
17
and 18.
The appliance heats up and is ready for use
again when the LED eco lights green.
