Service programme:
Combined cleaning and
descaling process
If an “S” is shown on the display while the
appliance is on, the service programme
must be run immediately to clean and
descale the appliance. If the service
programme is not run as instructed, the
appliance may be damaged.
Specially-developed descaling
(order no. 310967) and cleaning agents
(order no. 310575) are included with the
appliance and can also be obtained from
customer service.
Warning
Each time you run the service programme,
you should follow the instructions for
using the cleaning and descaling agents
carefully.
Never interrupt the descaling programme.
Do not drink the liquids.
Never use vinegar or vinegar-based
products.
Never put descaling tablets or other
descaling materials into the duct for
cleaning tablets.
i The “S” symbol ashes while the service
programme is running (approx. 40
minutes).
Important: If there is a lter in the water
tank, it needs to be removed before the
service programme is run.
Starting the service programme
Important: There should be approx. 0.5
liters of water in water tank 13.
● Switch the appliance to “eco” mode.
● Hold down the coffee dispensing button
4 for at least 5 seconds. The appliance
rinses 2 x through the coffee outlet 10.
I lights up on the display.
● Empty and reinsert the trays 21 and 22.
X lights up on the display.
● Open the cover of the duct 15 for ground
coffee / cleaning tablets.
● Place one cleaning tablet in the duct 15
and close the cover.
H lights up on the display and the 4
button ashes.
● Empty the water tank before lling it with
lukewarm water, add descaling agent and
dissolve completely (total liquid: 0.5 litres).
or
Pour prepared descaling mixture into the
water tank (total liquid: 0.5 litres).
● Press the 4 button. The descaling
process begins. Duration approx. 10
minutes. The descaling solution ows into
the water tray 22.
J ashes on the display.
● Place a suitable container (approx.
0.5 litres) under the nozzle 9.
● Set the dial 8 to g/h. The descaling
process begins. Duration approx. 5
minutes. The descaling solution ows into
the container.
I lights up on the display.
● Empty and reinsert the water tray 22.
H lights up on the display and the 4
button ashes.
● Empty and clean the water tank 13, ll
with fresh water up to the “max” mark and
reinsert.
● Place a suitable container (approx.
0.5 litres) under the nozzle 9.
● Press the 4 button. The cleaning process
begins. Water ows into the container.
J lights up on the display.
● Turn the dial 8 to
●
. The cleaning
process begins. Duration approx. 10
minutes. Liquid ows into tray 22 inside
the appliance, then from the coffee outlet.
