Bedienungsanleitung Siemens VS06G2000 (Seite 19 von 156) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

73376

Zoom out

Zoom in

Vorherige Seite

1/156

Nächste Seite

Emptying the dust container and

cleaning the particle filter

To achieve optimum vacuuming results, the dust

container should be emptied and all the filters

should be cleaned after every vacuuming job

and, at the latest, when the maximum fill level is

reached.

Emptying the dust container

Figure

Use the release button to unlock the cylinder.

The cylinder releases upwards.

Figure

Remove the dust container from the vacuum

cleaner using the handle.

Figure

Press the button (PRESS) to release the dust

container flap and empty the container into

the rubbish bin.

Emptying the dust container

Figure

Ⅲ

Close the dust container flap and click it into

place at all 3 catches.

Cleaning the foam filter and fluff filter

Figure

Ⅲ

Open the filter cartridge and take out the filter

frame with the fluff filter and foam filter.

Ⅲ

Remove the fluff filter and foam filter from the

filter frame and clean them by tapping out the

dirt. If the filters are very dirty, they should

both be rinsed out.

Ⅲ

Insert the foam filter into the fluff filter and

clip into the filter frame.

Ⅲ

Insert the filter frame into the filter cartridge

and click into place, in the direction of the

arrow.

Cleaning the motor protection filter

Figure

Ⅲ

Open the motor protection filter flap.

Remove the micro filter and shake it clean.

If the micro filter is very dirty, it should be

rinsed out.

A replacement micro filter may be ordered via

the After Sales service.

Replacement part number: 642879

CAUTION: The vacuum cleaner must only

be operated with the motor protection

filter, foam filter and fluff filter fitted.

The filters must be completely dry before

they are refitted in order to ensure that they

function correctly and to prevent the for-

mation of odours or bacteria (wait about

24 hours)

Figure

Ⅲ

Fit the dust container into the vacuum cleaner

(make sure it is fitted correctly).

Ⅲ

Push the cylinder back into position, closing the

vaccum cleaner (you will hear a positive click).

CAUTION: The cylinder can only be

engaged if the dust container is fitted

correctly.

Cleaning the washable exhaust filter

(made by Schwarzvlies)

Figure

Ⅲ

Open the exhaust filter cover.

Ⅲ

Remove the exhaust filter.

Figure

Ⅲ

Clean the exhaust filter by knocking out the

dirt.

Ⅲ

If the exhaust filter is very dirty, it should be

rinsed out (or washed in the washing machine

at 40°C).

Ⅲ

Fit the exhaust filter.

Ⅲ

Close the exhaust filter cover.

CAUTION: The filter must be completely

dry before it is refitted in order to ensure

that it functions correctly and to prevent

the formation of odours or bacteria (wait

about 24 hours).

Innenteil 206 921 A 29.01.2007 15:31 Uhr Seite 13

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Siemens VS06G2000 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info