Bedienungsanleitung Siemens VS06G2000 (Seite 21 von 156) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

73376

Zoom out

Zoom in

Vorherige Seite

1/156

Nächste Seite

What kind of dirt can be vacuumed using the

vacuum cleaner?

All kinds of household dirt can be vacuumed

using the SX1. When vacuuming fine particles,

note that the motor protection filter, foam filter

and fluff filter must be cleaned at regular

intervals to guarantee the optimum function of

the vacuum cleaner.

Should the dust container be emptied after

each use of the vacuum cleaner?

The dust container should be emptied after each

use for hygiene reasons, or at the latest when

the maximum level (see the mark) is reached.

How often should filter cartridges and motor

protection filters be cleaned/rinsed out?

Ideally, the filters should be cleaned after each

use, especially after vacuuming fine particles,

either by tapping or rinsing, depending on the

level of dirt.

The motor protection filter, foam filter and fluff

filter must be cleaned at the latest when the

maximum level (see max. marking on dust

container) has been reached.

How often should the washable exhaust filter

be cleaned/rinsed?

The washable exhaust filter should be cleaned

regularly for hygiene reasons by tapping the

dust out and must be rinsed through at least

once every 6 months (or washed in the washing

machine at 40°C).

What is the best way to transport my vacuum

cleaner?

The SX1 can be transported easily using the

ergonomic carrying handle, e.g. for vacuuming

the stairs. It is best to hold/carry the tube with

the floor tool in the other hand.

Frequently asked questions

Troubleshooting small problems

Problem

Suction power

becomes noticeably

weaker

Bottom flap of the

dust container

does not close

Cause

The filter cartridge /

motor protection filter

is heavily soiled.

The nozzle is blocked

The hose / telescopic

tube is blocked.

The hose / handle

is blocked

The dust separator

is blocked

The dust separator

joint is blocked

The bottom flap

is soiled

Solution

Clean the motor protection filter, fluff filter and foam

filter by tapping out the dust or rinsing (Fig. 17, 21-23).

Caution: After rinsing, replace the motor protection

filter, foam filter and fluff filter only once they are

completely dry (after approximately 24 hours).

Vacuum the nozzle, e.g. using the crevice nozzle

Slide the telescopic tube together and separate the

suction pipe sections.

Loosen and remove the blockage.

Separate the hose from the vacuum cleaner and handle

Loosen and remove the blockage.

Remove the twist-lock cover from the dust separator,

loosen and remove the blockage. Clean the dust

separator with a damp or dry cloth if necessary.

Replace the twist-lock cover (Fig. 26, 27)

Detach the dust separator from the vacuum cleaner,

remove the blockage and click the joint back into the

vacuum cleaner (Fig. 28).

Clean the bottom flap, e.g. with a damp or dry cloth.

When closing the flap, ensure that it is fitted correctly.

Innenteil 206 921 A 29.01.2007 15:31 Uhr Seite 15

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Siemens VS06G2000 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info