Bedienungsanleitung Siemens VS57E20 (Seite 14 von 119) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

73394

Zoom out

Zoom in

Vorherige Seite

1/119

Nächste Seite

Disposal information

Packaging

The packaging is designed to protect the vacuum

cleaner from being damaged during transportation. It is

made of environmentally friendly materials and can be

recycled.

Dispose of packaging that is no longer required at an

appropriate recycling point.

Used vacuum cleaners

Used vacuum cleaners still contain many valuable

materials. Therefore, please take your used vacuum

cleaner to your retailer or recycling centre to be

recycled. For current disposal methods, please enquire

at your retailer or your local council.

Disposal of filters and dust bags

Filters and dust bags are made from environmentally

friendly materials.

As long as they do not contain substances that are not

permitted to be disposed of in the household rubbish,

you can dispose of them with your normal household

rubbish.

Please note

The mains socket must be protected by at least a 16

amp fuse.

If a fuse should blow when you switch on the appliance,

this may be because other electrical appliances which

have a high current draw are connected to the same

power circuit.

To prevent the fuse from blowing, select the lowest

power setting before switching the appliance on, and

increase the power only once it is running.

Fold out picture pages.

Before using for the first time

Figure

Push the handle onto the flexible hose until it

engages.

Figure

Push the crevice nozzle and upholstery nozzle back

into the accessories holder as illustrated.

Setting up

Figure

a)Push the flexible tube adapter into the air intake

opening in the vacuum cleaner lid until it engages

b)To remove the flexible hose, press the two lugs

together and pull the tube out.

Figure

a)Connect together the handle and

vacuuming/telescopic tube.

b)Push the handle into the telescopic tube until it

engages.

Press on the locking collar and pull out the

telescopic tube to disconnect.

Figure

a)Insert the suction pipe into the floor tool adapter.

b)Push the telescopic tube straight into the connecting

piece of the floor tool until it engages.

Press on the locking collar and pull out the

telescopic tube to disconnect.

Figure

a)Connect the suction pipes together.

b)Release the telescopic tube by moving the adjusting

sleeve/sliding switch in the direction of the arrow

and adjust the tube to the required length.

Figure

Holding the power cord by the plug, pull out the

required length and plug the plug into the mains

socket.

Figure Switching on/off

Ⅲ

Your appliance is fitted with a pop-out control

button.

Ⅲ

To switch on the appliance, press the control button

in the direction of the arrow down to the stop and

release. This will release and extend the controller.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Siemens VS57E20 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info