Bedienungsanleitung Silvercrest IAN 327376 SBLP 5.0 B1 (Seite 3 von 14) (Deutsch, Englisch, Holländisch, Französisch, Polnisch, Schwedisch)

750524

Zoom out

Zoom in

Vorherige Seite

1/14

Nächste Seite

Thank you for your trust!

Congratulations on your new Bluetooth speaker.

For safe handling of the device and in order to get to know the entire range

of features:

• Thoroughly read these user instructions prior to initial use.

• Above all, observe the safety information!

• The device should only be used as described in this copy of

the user instructions.

• Keep this copy of the user instructions for future reference.

• If you pass the device on to someone else, please include

this copy of the user instructions. The user instructions are

a part of the product.

We hope you enjoy your new Bluetooth speaker!

Notes on trademarks

The Bluetooth® word mark and the Bluetooth (®) logo are registered trade-

marks of Bluetooth SIG Inc. (Special Interest Group), any use of the trade-

mark by the Hoyer Handel GmbH is effected within the framework of a

licence. All other names and trademarks are the property of their respective

owners.

Symbols on your device

The symbol means that the content of the user instructions must be

observed.

Intended purpose

This is an entertainment electronics device. The Bluetooth loudspeaker is in-

tended for playing sound from audio devices via Bluetooth or using the

3.5 mm jack socket. The loudspeaker can be connected with another loud-

speaker via TWS.

The device is designed for private use. This device must not be used for com-

mercial purposes.

Do not make any changes or carry out any repairs. The manufacturer is not

liable for damage or malfunctions caused by improper repairs or modifica-

tions. This is the sole responsibility of the user.

Safety information

Warnings

If necessary, the following symbols and warnings will be used in these user

instructions:

DANGER! This symbol, in combination with the note “Danger”

means a high risk. Failure to observe this warning may result in

injury to life and limb.

WARNING! This symbol, in combination with the note “Warn-

ing” means a moderate risk. Failure to observe this warning may

result in injury or serious material damage.

CAUTION! Low risk: failure to observe this warning may result in

minor injury or material damage.

NOTE: circumstances and specifics that must be observed when handling

the device.

DANGER for children and people with

disabilities

~Packing materials are not children's toys. Children must not be allowed

to play with the plastic bags. There is a risk of suffocation.

~This device is not designed to be used by people (including children)

with limited physical, sensory or mental capabilities or people without

adequate experience and/or understanding, unless they are supervised

by someone responsible for their safety or are instructed by them on

how to use the device.

~Children must not play with the device.

~Cleaning and user maintenance must not be performed by children.

~Keep the device out of the reach of children.

DANGER from the battery

~This device must not be thrown into fire. DANGER OF EXPLOSION!

~The device must not be covered while the battery is charging.

The device must only be charged in a dry environment.

~The device contains a lithium polymer battery.

- The battery cannot be removed.

- This device must not be opened.

- Completely dispose of the device.

~Do not expose the device to direct sunshine or heat. The ambient tem-

perature should not be lower than 10 °C or higher than 40 °C. Please

remember that in a car the storage temperature may significantly ex-

ceed 40 °C.

~Because of the high power consumption, do not charge the loudspeak-

er through a laptop / PC. Only charge the loudspeaker via a USB pow-

er unit (5 V, min. 1 A, not included in the items supplied).

~The battery may only be charged with the original accessory (USB

charger cable).

WARNING! Risk of material damage

~If you notice any irregularities (e.g. unusual noises, strange smells or

smoke developing) turn the device off immediately and remove all ca-

bles. Do not use the device any longer.

~If the device is moved from a cold location to a warm location, conden-

sate may form in the device. Leave the device switched off for a few

hours to become acclimatised.

~Protect the device against damage, e.g. from:

- Drips and water splashes

- Heat, direct sun radiation and open flames (e.g. candles)

- Knocks and similar violent effects

~Protect the cable against damage, e.g. from:

- sharp edges

- hot places

- clamping or crushing

~Do not use any astringent or abrasive cleaning agents.

~In order to avoid any hazards, do not make modifications to the device.

Repairs must be carried out by a specialist workshop or the Service

Centre.

Items supplied

1 Bluetooth loudspeaker

1 USB charger cable (Type A on Micro USB)13

1 3.5 mm stereo jack cable14

1 copy of the user instructions

1 quick reference guide

In the event of incomplete or defective delivery, please contact the responsible

service centre of the manufacturer (see “Warranty of HOYER Handel GmbH”).

Before using for the first time

• Remove all packing materials.

• Remove any protective films from the device.

• Check that the device is undamaged. A damaged device must never be

used.

Overview Charging

WARNING!

~Because of the high power consumption, do not charge the loudspeak-

er through a laptop / PC. Only charge the loudspeaker via a USB

power unit (5 V, min. 1 A, not included in the items supplied).

~The device must not be covered while the battery is charging.

~The device must only be charged in a dry environment.

NOTES:

• When using a USB power unit (not included in items supplied), comply

with its user instructions. The USB power unit must be able to output at

least 1A output current.

• Charge the battery fully before using the device.

• The maximum battery capacity is reached after approx. 4 - 5 charging

cycles.

• At a battery capacity of less than approx. 10 %, an audio signal will

sound once and the charging LED8 will be lit red until the device auto-

matically switches itself off.

• The charging time of an empty battery is approx. 2 - 2.5 hours. Play-

back is possible during the charging process, however this extends the

charging time.

1. Connect the Micro USB plug of the USB charger cable13 to the Micro

USB port9 of the device.

2. Connect the USB A plug of the USB charger cable13 with a USB pow-

er unit (not included in the items supplied). The charging LED8 is lit red

and goes out when the battery is fully charged.

Operation

Functions of the buttons

NOTE: it is possible that not all of the functions will be supported by all au-

dio devices. This is not a device error.

LED displays

Establishing a Bluetooth connection

NOTES:

• The identification of the loudspeaker is “SBLP5.0B1”.

• After switching on, the loudspeaker automatically tries to reconnect to

the last paired device or to establish a new connection.

• Please observe that establishing the connection may vary slightly de-

pending on the audio device and the software used.

• The Bluetooth range is 10 metres.

• The loudspeaker switches off if no Bluetooth connection can be estab-

lished within 10 minutes.

• With moderate volume settings, the loudspeaker can be used for a

playback period of approx. 12 hours with the Bluetooth connection es-

tablished.

• If you pass the loudspeaker on to someone else, in order to protect your

data and your privacy, you should disconnect the Bluetooth connection

to the device and delete it from the connection list on your smartphone.

1. If necessary, remove the plug of the 3.5 mm stereo jack cable14 from

the jack socket10.

2. Switch the loudspeaker on using the button 6. An audio signal

sounds. The LED2 flashes white. The Bluetooth identification of the de-

vice is sent.

3. Switch on the audio device (e.g. smartphone) and start the Bluetooth

connection. The audio device should now receive the device identifica-

tion “SBLP5.0B1”.

4. Establish a connection to the Bluetooth loudspeaker on the audio de-

vice. Both devices are now interconnected. The LED2 on the device

flashes white slowly and an audio signal sounds.

NOTE: it is possible that audio devices remember the identification of the

loudspeaker. Thus it is possible that a new connection may not be have to

be established manually while the Bluetooth function is activated.

5. Now, start the playback of a music track on the audio device. The

sound is played back via the loudspeaker7.

1Pairing button 8Charging LED

2Operating mode LED 9Micro USB port

3Button 10 Jack socket

4Button 11 Rubber cover

5Button 12 Membrane

6On/off button 13

USB charger cable for Micro USB/Type A

7Loudspeaker 14 3.5 mm stereo jack cable

1 3 4 5 6 9 10 11 12

1314

Button Function

6• Switching on /off: press for approx. 2 sec., a brief sound se-

quence is audible.

5

• Press briefly: increase the volume (audio signal at maximum

volume)

• Keep pressed: next track

4• Press briefly: pause / play

3

• Press briefly: reduce the volume (audio signal sounds at min-

imum volume)

• Keep pressed for 1x: start of track

• Hold down 1x during the first 2 seconds of a track: previous

track

1

• Press briefly until a sound can be heard. The active connection

is interrupted and a new one can be set up.

• Press and hold on one loudspeaker to connect 2 loudspeakers

with one another

LED display Function

Charging LED8 is lit red Battery is being charged / or the battery ca-

pacity is under 10 %

LED2 flashes white Device sending device identification in order

to establish a Bluetooth connection (pairing)

LED2 flashes white very

slowly Bluetooth connection is established

LED2 is lit white Left loudspeaker of paired loudspeakers

LED2 is lit green The plug of the 3.5 mm stereo jack cable14

is plugged into the jack socket10 (no Blue-

tooth function)

BLUETOOTH® SPEAKER SBLP5.0B1

Operating instructions

IAN 327376_1904

10/2019 ID: SBLP 5.0 B1_19_V1.6

HOYER Handel GmbH

Tasköprüstraße 3

22761 Hamburg

GERMANY

Status of information:

__327376_.book Seite 2 Montag, 21. Oktober 2019 11:1 11

Silvercrest IAN 327376 SBLP 5.0 B1 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info