Bedienungsanleitung Silvercrest KH6506 (Seite 8 von 29) (Englisch)

118093

Zoom out

Zoom in

Vorherige Seite

1/29

Nächste Seite

- 6 -



6. Connecting the DVD Player to a Television

After setting up the DVD player, you can now connect it to a

television. The DVD player can be connected to a television

that operates with the PAL, NTSC and SECAM standards.

If you want to use the DVD player on a television with...

• ... NTSC standard you will have to change the video setting

in the DVD's so called "OSD menu". There PAL is set as the

television standard at the factory.

• SECAM standard you do not need to change any settings.

The factory setting for the PAL standard also allows the

DVD player to operate with SECAM televisions in so far as

these can process the signals.

On this topic see also capital 8.3 "Video settings: Set the

television standard"

Depending on the features of the television, there are various

options for connecting the DVD player to it:

6.1. Connecting to a Television via ScartCable/RGB

 NOTE:

Connecting the DVD player to a television with a Scart cable

via the RGB input offers a high quality connection. Select this

connection variation in the case of televisions equipped with

an RGB input. If you are not sure if the television is equipped

with an RGB input then you can check this by consulting the

television's instruction manual.

• Connect the jack inscribed with EURO SCART to a television

Scart socket by using the supplied Scart cable.

• For playback select the matching channel on your tele-

vision Check with the television's instruction manual on

how you can set the AV channel.

• In the OSD menu select the menu Video/Video out/RGB.

On this topic see also capital 8.3 “Video settings:

Video out“.

6.2. Connecting to a Television via S-Video

NOTE:

For this connections variant the television must be equipped

with an S-video input and two unoccupied audio cinch sockets.

If you are not sure if the television is capable of handling S-video,

for example via cinch sockets, then you can check this by con-

sulting the television's instruction manual.

For this connection variant you will need:

• an audio cinch cable (not supplied)

• an S-video cable (not supplied) These can be obtained

from your dealer.

In order to connect the DVD player to a television via S-video...

• Connect the jack inscribed with S-VIDEO to a television S-video

socket using an S-video cable.

• Insert the white audio cinch cable plug into the cinch socket

inscribed "FL" on the rear panel of the DVD player.

• Then insert the white plug at the other end of the audio

cinch cable into the left channel audio socket on the tele-

vision.

• Insert the red audio cinch cable plug into the cinch socket

inscribed "FR" on the rear panel of the DVD player.

• Then insert the red plug at the other end of the audio

cinch cable into the right channel audio socket on the tele-

vision.

• For playback select the matching channel on your tele-

vision Check with the television's instruction manual on

how you can set the AV channel.

• In the OSD menu select the menu Video/Video out/

S-Video.

On this topic see also capital 8.3 "Video settings:

Video out“.

KH 6506

KH6506_V2955_UK 02.04.2007 15:10 Uhr Seite 6

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Silvercrest KH6506 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info