Bedienungsanleitung Silvercrest KH6506 (Seite 10 von 29) (Englisch)

118093

Zoom out

Zoom in

Vorherige Seite

1/29

Nächste Seite

- 8 -



7. Connecting audio components to the DVD player

Besides sound replay of DVDs, VCDs/S-VCDs and from Audio

and MP3-CDs via…

• the loud speaker of the television, to which the DVD player is

connected sound replay can also be produced via external

Audio components such as HiFi systems, Dolby Digital/DTS

receiver or Surround Sound systems.

You have the following options here:

7.1. Connecting a HiFi system

In order to enjoy a full sound experience when playing DVDs

with the DVD player you can connect a HiFi system to the

player. Before connecting check with the HiFi system's instruc-

tion manual to verify...

• if the HiFi system is suitable for connection to a DVD player.

If yes…

• if the HiFi system is equipped with cinch sockets; if yes,

you can connect the HiFi system to the DVD player via

cinch cables.

In order to connect a HiFi system...

• Insert the white cinch cable plug into the cinch socket

inscribed "FL" on the rear panel of the DVD player.

• Then insert the white plug at the other end of the cinch

cable into the left channel cinch socket on the HiFi system.

• Insert the red cinch cable plug into the cinch socket inscribed

"FR" on the rear panel of the DVD player.

• Insert the red plug at the other end of the cinch cable into

the right channel cinch socket of the HiFi system.

• Check with the instruction manual which settings on the

HiFi system may be necessary in order to reproduce sound

via the HiFi system during the playback of a DVD, VCD/

S-VCD, Audio or MP3 CD from the DVD player.

NOTE:

For an optimal sound experience place your HiFi system's loud

speakers to the left and to the right of the television, on

which you connected the DVD player.

If you connected the DVD player to the television via a Scart

cable the Audio signal will be transmitted via the cinch cable

to your HiFi system as well as via the Scart cable to the tele-

vision. In this case, set the volume of the television to the

lowest value.

7.2. Connecting digital audio components via digital cables

In order to enjoy Surround Sound during playback of corres-

pondingly equipped DVDs (recognisable by the Dolby Digital

or DTS-Logo) you can connect the DVD player to

digital Audio components, for example a Dolby Digital or DTS

receiver or a suitable Surround system.

The necessary cable for the following described connection

variant can be purchased from the dealer.

First check, by means of the audio components instruction

manual, if a connection to the DVD player via a co-axial cable

is possible.

Connection via coaxial cable

In order to connect the DVD player to a digital audio compo-

nent with a digital coaxial cable...

• Connect the "COAXIAL" inscribed plug to the correspond-

ing socket on the digital audio component.

KH 6506

KH6506_V2955_UK 02.04.2007 15:10 Uhr Seite 8

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Silvercrest KH6506 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info