Bedienungsanleitung Silvercrest SDG 800 A1 - IAN 71108 (Seite 6 von 36) (Englisch)

679148

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

8 GB/IE/CY

Always ﬁll the base of the appliance / water

tank

with suﬃcient water for the period of

steaming. Do not cover the base of the appli-

ance / water tank

with aluminium foil or

any other material. If not observed, this can

lead to an overheating of the appliance.

Damage of the appliance is the consequence.

Never immerse the appliance in water and

always pull the mains plug before cleaning or

transporting it.

FOOD-SAFE! The taste and smell

of your food are not detrimentally

aﬀected by this product.

Avoid the hazard of

life by electric shock:

Make sure that the details on the rating label

are in conformity with your mains voltage.

Only connect the unit to alternating current.

Do not at all operate this unit with an external

timer or a separate telecontrol system.

Check the power cord

regularly

for damage or deterioration.

Do not operate the appliance when the power

cord

or the mains plug is damaged.

ATTENTION! A damaged power cord

presents a hazard of life by electric shock.

Have appliances, which do not work faultlessly

or which are damaged, immediately and only

checked and repaired by the after-sales service.

Do not use the power cord

for unplugging

the appliance. Keep the power cord

away

from hot surfaces, sharp edges and mechanical

forces. Damaged or entangled cords

increase

the risk of an electric shock.

Do not operate the appliance outside. Never

let the power cord

become wet or damp

during operation.

Unplug the power cord

when you are not

operating the appliance.

Use Original Accessories

Only use accessories and additional equipment

stated in the instruction manual. The use of other

products or accessories than recommended

in the instruction manual may present a risk of

injuries for you.

Prior to Initial Use

Clean all detachable parts prior to the initial use

with warm soapy water and dry them carefully.

Wipe the interior of the base of the appliance /

water tank

with a damp cloth.

Initial Operation

Observe the mains voltage. The mains voltage of

the power source must be in conformity with the

details on the rating label of the appliance. Appli-

ances declared with 230 V can also be operated

with 220 V.

Place the base of the appliance

on a stable,

even surface.

Then place the black turbo ring

onto the

heating element

mounted in the centre.

Make sure that the larger side faces downwards.

Now ﬁll the base of the appliance / water tank

with cold water up to the MAX mark

Note: Consider that the base of the appliance /

water tank

has to be ﬁlled with water at

least up to the MIN mark

ATTENTION! HAZARD OF BURNS!

Make sure that the water does not exceed the

MAX mark

. Otherwise, hot water may spurt

out of the appliance during operation.

ATTENTION! Do not add anything like sea-

sonings etc. to the water. This may aﬀect the

steam ﬂow and / or damage the surface of the

base of the appliance / water tank

and the

heating element

Now place the black condensate collection

basin

onto the base of the appliance

Make sure that the semi-circular elevation

points to the front towards the keypad and is

Safety / Prior to Initial Use / Initial Operation

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Silvercrest SDG 800 A1 - IAN 71108 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Silvercrest SDG 800 A1 - IAN 71108

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info