Bedienungsanleitung Silvercrest SDG 800 A1 - IAN 71108 (Seite 8 von 36) (Englisch)

679148

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

10 GB/IE/CY

cess gets stopped. The indicator on the LCD-

display

switches back to the time indicator

again (see Fig. A). Therefore, regularly

check the water level on the water level indica-

tor

and replenish suﬃcient water in good time!

ATTENTION! HAZARD OF BURNS!

Make sure that the water does not exceed the

MAX mark

. Otherwise, hot water may spurt

out of the steamer during operation.

Using Delay-Start Function

Note: Consider that the base of the appliance /

water tank

has to be ﬁlled with water at least up

to the MIN mark

. Ensure that the turbo ring

as well as the condensate collection basin

are

positioned correctly.

Press the PROG button

. In the LCD-display

the time indicator

as well as the PROG sym-

bol

(see Fig. A) will appear.

Press the PLUS / MINUS button

, to increase

the delay time in 10-minute steps or decrease it

in 1-minute steps to achieve the desired delay.

Note: The set delay time refers to the current

clock time. That means if you set a delay time

of 30 minutes at 13:00, the steaming process

will start at 13:30. The maximum delay time is

24 hours.

Press the PROG button

again.

Press the PLUS / MINUS button

to increase

the steaming time in 5-minute steps or decrease

it in 1-minute steps.

Note: The maximum steaming time is 90 minutes.

Note: Be aware that you might have to replen-

ish water when the steaming time is longer. Use

the openings on the sides of the condensate

collection basin

for reﬁlling. If the base of

the appliance / water tank

is ﬁlled up to

the MAX mark

, it will be suﬃcient for approx.

1 hour of steaming.

Press the PROG button

again. In the LCD-

display

the time indicator

as well as the

PROG symbol

will appear. The delay-start

is now activated.

If the set delay time is elapsed, a signal tone

will sound, the pilot lamp

will glow red and

the appliance will start the steaming process

automatically.

ATTENTION! HAZARD OF BURNS!

The appliance will become hot during use.

Beware of getting in contact with the ascending

steam or any components.

Note: The device starts to beep as soon as

the water in the reservoir is exhausted. The

steaming process is interrupted. Check the

water level in the reservoir regularly by referring

to the water level indicator

and add more

water in good time.

ATTENTION! HAZARD OF BURNS!

Make sure that the water does not exceed the

MAX mark

. Otherwise, hot water may spurt

out of the steamer during operation.

Press the PROG button

to terminate the

delay start. The PROG symbol

in the LCD-

display

will go out.

Keep-Warm Mode

If the steaming time is elapsed, the appliance will

automatically switch over to keep-warm mode.

- In the LCD-display

the time indicator

well as the keep-warm symbol

will appear.

- The pilot lamp

will glow green.

- The water is heated repeatedly in cycles in

the warm mode to keep the food warm at a

temperature of approx. 60–70 °C.

ATTENTION! HAZARD OF BURNS! The

appliance will become hot during use. Beware

of getting in contact with the ascending steam

or any components.

- The keep-warm mode will remain active until

the supply of water is used up or you press a

button.

Press the ON / OFF button

to terminate the

keep-warm mode.

Using Several Steam Trays

Place the largest items of food or those with the

longest steaming time into the bottom steaming

basket

Initial Operation

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Silvercrest SDG 800 A1 - IAN 71108 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Silvercrest SDG 800 A1 - IAN 71108

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info