Bedienungsanleitung Silvercrest SKF 2300 A1 - IAN 66928 (Seite 9 von 14) (Englisch)

575421

Zoom out

Zoom in

Vorherige Seite

1/14

Nächste Seite

- 7 -

Risk of personal injury!

Never take hold of the frying basket 3 directly after

frying. It is very hot! Lift the frying basket 3 out of

the fryer ONLY by the handle!

• Carefully lift the frying basket 3 out of the deep

fryer. If necessary, shake off any excess oil or fat

over the deep fryer.

• Tip the fried food into a bowl or a sieve (lined

with absorbent kitchen paper!)

If you do not use the deep fryer regularly it is re-

commended that, after cooling, the oil or liquified

fat is poured into a well sealed container and stored in

the refrigerator or a cool storeroom. Fill the contai-

ner through a sieve, in order to remove any food

particles from the oil or fat. Solid fats must still be in

a liquid state so that they can be poured.

Changing the frying oil or fat

Change the oil first when it has completely cooled

down. Solid fats must still be in a liquid state so that

they can be poured.

• Open the appliance lid.

• Remove the frying basket 3.

• Remove the operating/heating element 5.

Place the operating/heating element 5 at a

clean and dry location.

• Carefully remove the stainless steel container

4 with the oil or fat from the deep fryer.

• Pour the oil or fat into suitable containers, for

example bottles. For this, use the pouring runnel

at the corner of the stainless steel container 4.

Note:

The disposal of cooking oils and fats is regulated

differently in every community or town. Frequently,

it is not permitted to dispose of such oils or fats with

normal household refuse. Make enquiries at your

local community administration office about suitable

disposal sites.

• Thoroughly clean all parts of the deep fryer,

as described in the Chapter "Cleaning".

• Refill the deep fryer with fresh oil or fat, as de-

scribed in the Chapter „Frying“.

Cleaning and Care

Danger!

Remove the power cable from the wall socket before

cleaning. There is a risk of receiving an electric shock!

Danger!

Allow the deep fryer to cool down. Otherwise you

risk being burnt!

NEVER submerse the control and heating ele-

ment 5, the power cable and plug or the ap-

pliance housing under water and NEVER clean

them under running water! This could irrepar-

ably damage the appliance. If required, clean

this element with a moist cloth.

Attention! Appliance Damage!

When cleaning the components do not use aggres-

sive or abrasive cleaning agents or materials such

as scouring milk or steel wool. These could damage

the upper surfaces of the appliance!

To simplify cleaning, completely dismantle the deep

fryer:

1. Open the appliance lid and remove it by pulling

it upwards.

2. Pull the handle upwards until it audibly engages.

Remove the frying basket 3.

3. Pull the operating/heating element 5 upwards

from the guiding rails. Place the operating/heating

element 5 at a clean and dry location.

4. Take out the stainless steel container 4 and re-

move the fat or oil

IB_66928_SKF2300A1_LB6 28.04.2011 14:57 Uhr Seite 7

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Silvercrest SKF 2300 A1 - IAN 66928 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Silvercrest SKF 2300 A1 - IAN 66928

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info