Bedienungsanleitung Silvercrest SMZS 260 D3 IAN 88609 (Seite 47 von 54) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

739938

Zoom out

Zoom in

Vorherige Seite

1/54

Nächste Seite

WARNING! Risk of material

damage

• The maximum filling level for solid food

is 350ml.

• The maximum filling volume for liquids

(e.g. cream) is 200ml.

• The device is designed for a maximum

operating time of 1 minute without inter-

ruption. After this, the device must re-

main switched off until it has cooled

down to room temperature.

• In order to avoid damage to the device,

interrupt the mixing process immediately

if the blade insert / cream attachment

does not rotate or only rotates slowly.

Pull out the mains plug and check

whether there is something in the vessel

blocking movement or whether the food

is too tough. Also check whether the de-

vice is assembled correctly.

• Do not operate the device when it is emp-

ty, as this causes the motor to overheat

and may result in it being damaged.

• Only use the original accessories.

• Do not use any astringent or abrasive

cleaning agents.

• The device is fitted with a non-slip plas-

tic base. Because furniture can be coat-

ed with a wide variety of varnishes and

plastics and treated with various care

products, the possibility cannot be ex-

cluded that some of these substances

have ingredients that may attack and

soften the plastic base. If necessary,

place a non-slip mat under the device.

4. Items supplied

1 Motor block 3

1 Working cover 4

1 Vessel 7

1 Vessel cover 9

1 Blade insert 6 and 1 cream attachment 5

(assembled)

1 Set of operating instructions

5. How to use

• Remove all packing material.

• Check to ensure that all parts are pre-

sent and undamaged.

• Clean the device prior to its first

use! (See “Cleaning” on page 48.)

6. Operation

DANGER! Risk of electric shock!

Only insert the mains plug 2 into a

wall socket when the multi chopper is

fully assembled and filled.

DANGER! Risk of injury from

cutting!

• The blade insert is sharp. Handle it with

care.

• The device must never be operated with-

out the vessel.

• The blade insert continues to rotate after

the device is switched off. Wait for it to

stop moving before you remove the

working cover.

WARNING! In order to avoid damage to

the device, interrupt the mixing process im-

mediately if the blade insert 6 / cream at-

tachment 5 does not rotate or only rotates

slowly. If this happens, pull out the mains

plug 2 and check whether there is some-

thing in the vessel 7 blocking movement or

whether the food is too tough. Also check

whether the device is assembled correctly.

6.1 Blade insert

Application area

The blade insert

is suitable for chopping sol-

id foods, e.g. onions, carrots, cheese, nuts.

Preparing food

•Use …

… no more than the maximum

filling level of 350ml of solid

food, or

… a maximum of 200 ml of liquid.

__RP88609_B1.book Seite 45 Dienstag, 15. Januar 2013 3:30 15

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Silvercrest SMZS 260 D3 IAN 88609 Seite 47

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info