Bedienungsanleitung Silvercrest SMZS 260 D3 IAN 88609 (Seite 49 von 54) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

739938

Zoom out

Zoom in

Vorherige Seite

1/54

Nächste Seite

• Figure D: In order to work at high

speed, additionally press down on the

TURBO 1 button.

• Work using short pulses (1pulse: press

for approx. 1second).

The number and

length of the pulses will depend on the

quantity and consistency of the food. See

the specifications given in the

"Process-

ing table" section.

• Repeatedly check the result. If the food

is not being chopped evenly:

- Pull out the mains plug 2, remove the

motor block 3 and thoroughly shake

the vessel 7.

- If food is sticking to the inside wall of

the vessel, rotate the working cover 4

anti-clockwise and remove it. Push the

pieces downwards using a spatula.

- Put all the pieces back together be-

fore you reinsert the mains plug 2 into

a wall socket and resume work.

6.2 Cream attachment

Application area

The cream attachment 5 has been specially

designed for whipping cream in the multi

chopper. It is placed on top of the blade in-

sert 6. There are two options here: one for

smaller quantities (up to 100 ml) and one for

larger quantities (100 to 200 ml).

NOTE: Wherever possible, work with well

cooled whipping cream (refrigerator temper-

ature), so that the whipped cream reaches a

firm consistency.

Whipping cream

1. Place the vessel 7 on the vessel cover 9.

2. Carefully place the cream attachment 5

onto the blade insert 6 from above.

- Up to 100 ml: Figure E: Rotate the

cream attachment so that it is in con-

tact with both blades and clicks into

place.

- 100 to 200 ml: Figure F: Rotate the

cream attachment so that it is in con-

tact with one of the blades and clicks

into place. This causes it to sit higher

in the vessel.

3. Place the blade insert 6 together with

the cream attachment 5 onto the spin-

dle8 in the vessel.

4. Pour the cooled whipping cream (maxi-

mum 200 ml) into the vessel 7.

5. Place the working cover 4 onto the ves-

sel 7 in such a way that the two small

tabs on the working cover fit into the

grooves in the vessel and rotate the

working cover clockwise until it clicks

into place.

6. Place the motor block 3 into the upper

edge of the working cover 4.

NOTE: The motor block does not fit

onto the working cover entirely straight

on the right-hand side.

7. Press down on the motor block

and hold

it pressed down for approx. 30 to 50 sec-

onds. Check the result while doing so.

6.3 Remove food

NOTE:

You can choose to use the vessel cov-

as the cover or the base

(FigureG)

1. Disconnect the mains plug 2 from the

wall socket.

2. Remove the motor block 3.

3. Rotate the working cover 4 anti-clock-

wise and remove it.

4. Carefully remove the blade insert 6 (if

necessary together with the cream at-

tachment 5) from the vessel 7.

5. Remove the food, e.g. using a spatula.

6. Clean the device as soon as possible af-

ter use.

__RP88609_B1.book Seite 47 Dienstag, 15. Januar 2013 3:30 15

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Silvercrest SMZS 260 D3 IAN 88609 Seite 49

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info