Bedienungsanleitung Silvercrest Z31281 - IAN 75609 (Seite 8 von 45) (Deutsch, Englisch, Dänisch, Schwedisch, Finnisch)

575343

Zoom out

Zoom in

Vorherige Seite

1/45

Nächste Seite

8 GB/IE

Installation / Bringing into use / Operation

the housing by sliding it downwards (Fig. A).

2. Mount the wall bracket

vertically in the

desired position on the wall with the sup-

plied screws

and dowels

Note: The supplied dowels are intended for

use in ordinary solid masonry. Seek expert

advice on suitable ﬁxings if the device is to

be ﬁxed to another type of wall construction.

3. Pull the separation strip out of the battery

compartment

Then mount the scale on to the wall bracket

Note: Measuring accuracy may be detri-

mentally aﬀected if the device is not in-

stalled vertically.

Bringing into use

Setting the time

j Press the MODE / + button

until the

device enters the clock mode.

j Press the SET / WEIGHT MODE button

to enter the settings mode. The minute dis-

play value ﬂashes.

j You can use the MODE / + button

or the

Digital timer / UNIT / Alarm / - button

to set the value.

Note: If you keep these buttons

pressed, you can accelerate the process

and reach the desired value more quickly.

j Press the SET / WEIGHT MODE button

to store the set value and move on to setting

the hour display value. The hour value ﬂashes.

j You can use the MODE / + button

or the

Digital timer / UNIT / Alarm / - button

set the value.

j Press the SET / WEIGHT MODE button

to store the set value and leave the settings

mode.

Note: If no key is pressed within 10 seconds,

the set value will stop ﬂashing and the time

is set to the value shown in the display.

Operation

The device has ﬁve functions:

1. Time display

2. Weighing

3. Temperature display

4. Alarm function

5. Digital countdown timer

j You can switch between the various func-

tions by pressing the MODE / + button

Using the time display

j Press the MODE / + button

until the de-

vice enters the clock mode.

j The display shows the time (hours:minutes).

j If you wish to change the time to another

value, proceed as described in the section

“Setting the time”.

Note: The device continues to show the

time unless the device is switched to anoth-

er function by you pressing the MODE /

+ button

Using the scale

Note: When using this product as a tabletop

unit, make sure it is placed on a solid and ﬂat

surface for the weighing process.

j Fold down the glass plate

j Place the weighing bowl

on the device’s

weighing platform.

j If necessary press the MODE / + button

until the device enters the weighing

mode. This comes after the time display.

j You can press the SET / WEIGHT MODE

button

to switch between the weighing

mode settings for weight

, water

and

milk

. The selected weighing mode set-

ting is indicated by a small bar indicator in

the display.

75609 CB3_GB_DK.indd 8 7/5/2012 8:47:30 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Silvercrest Z31281 - IAN 75609 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Silvercrest Z31281 - IAN 75609

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info