Bedienungsanleitung Singer 1004 Vivo (Seite 5 von 14) (Englisch)

616809

Zoom out

Zoom in

Vorherige Seite

1/14

Nächste Seite

ACCESSORIES

Standard Accessories

1.All Purpose Foot

2.Satin Stitch Foot

3.Blind Hem Foot

4.Spool Base

5.Spool Cap

6.Metal Bobbins (2 + 1 in machine)*

7.Darning Plate

8.Package of Needles

*IMPORTANT!

Use only SINGER brand metal Class 15 bobbins in this sewing machine. The tension on

the bobbin thread is operated magnetically. Therefore, the metal bobbin is required.

Using transparent or plastic bobbins, though they may seem to fit in the machine, will not

allow the machine to function properly, and the stitch result will be unsatisfactory.

Using metal bobbins will provide correct stitch results.

PRINCIPAL PARTS AND WHAT THEY DO

Feed Dogs move the fabric under the presser foot.

Bobbin Cover Plate sits over the bobbin and bobbin case. It is transparent, making it

easier to monitor the thread supply.

Bobbin Cover Release Button is located to the right of the bobbin cover plate. Press it

to the right to release the cover when replacing the bobbin.

Spool Pin holds the thread spool. The spool pin holder fits onto the spool pin to allow

thread to unwind without tug or drag. The spool pin can be used in either of two ways

(horizontally or vertically), depending on the size of the thread spool being used.

Bobbin Winder is used for smoothly and evenly winding thread onto the bobbin.

Carry Handle is built-in, making it easy and convenient for transporting the machine.

Hand Wheel controls the movement of the take-up lever and the needle. Always turn

the hand wheel toward you.

Foot Controller Input is located at the back of the machine. The foot controller cord

must be plugged into this input before starting to sew.

Foot Controller is used to start the machine sewing. Step on the controller to begin

sewing and remove your foot from the controller to stop sewing.

Power Cord Socket at the back of the machine is where the power cord is inserted in

order to provide power to the machine.

Power Cord has one end that connects into the power cord socket and another end that

is connected to a main power supply.

Presser Foot Lifter is located inside the “C” area of the machine. Use the lever to raise

and lower the presser foot. The foot is raised before threading the machine and to

remove work from the machine. Lower the presser foot lifter before beginning to sew.

Light Switch & Built-in Sewing Light are used to illuminate the sewing area.

Faceplate houses the take-up lever, sewing light, tension mechanism and more.

Thread spool is used to hold and direct the thread into the tension disks.

There is a diagram at the top of the machine indicating where the thread slips into

the guide.

Bobbin case holds the bobbin thread securely, providing adequate tension on the

thread while sewing.

17.

18.

19.

20.

21.

22.

23.

24.

25.

26.

27.

28.

29.

30.

31.

32.

(Style 2020/Size 14/90)

9.Instruction Book

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Singer 1004 Vivo Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info