Bedienungsanleitung Skil 0180 (Seite 14 von 164) (Alle Sprachen)

797780

Zoom out

Zoom in

Vorherige Seite

1/164

Nächste Seite

full capacity of the battery, completely charge the battery

in the battery charger before using your power machine

for the rst time)

• Only use the following batteries and chargers with

this machine

-SKIL battery: BR1*41****

-SKIL charger: CR1*41****

• Do not use the battery when damaged; it should be

replaced

• Do not disassemble the battery

• Do not expose machine/battery to rain

• Permitted ambient temperature (machine/charger/

battery):

-when charging 0...+45°C

-during operation –20...+50°C

-during storage –20...+50°C

EXPLANATION OF SYMBOLS ON TOOL

4 Read the instruction manual before use

5 Batteries may explode when disposed of in re, so do not

burn battery for any reason

6 Store tool/charger/battery in locations where temperature

will not exceed 50°C

7 Do not dispose of electric tools and batteries together

with household waste material

8 Beware of sharp blades, after switching o the tool the

blade continues to rotate for a few seconds, switch o

and remove the battery pack from tool before cleaning/

maintenance.

9 

debris (keep bystanders a safe distance away from work

area)

q Wear protective glasses and hearing protection

w Do not expose tool to rain

USE

• Charging battery

! read the safety warnings and instructions

provided with the charger

• Removing/installing the battery r

• Adjusting height of tool handle F t

I = High

II = Medium

III = Low

• Adjusting cutting height (25-90mm) G y

-adjust handle G by putting it in slot for desired cutting

height. 1=25 mm, 2=32 mm, 3=40 mm, 4=51 mm,

5=64 mm, 6=77 mm, 7=90 mm

• On/o safety switch u

Prevents the tool from being switched on accidentally

-switch on tool by rst pressing safety switch A and then

pulling trigger switch B

-switch o tool by releasing trigger switch B

! 

rotate for a few seconds

• Operating instructions

-hold the mower with both hands

-place the mower on the edge of the lawn and mow in a

forward direction

-reverse at the end of each turn, slightly overlapping the

previous cut strip

! only use the mower on dry grass

-keep the mower away from solid objects and plants

and the battery pack is disconnected. Unexpected

operation of the lawnmower may result in serious

personal injury.

ADDITIONAL RULES FOR LAWN MOWER

• The user is responsible for accidents or hazards

occurring to other people or their property

• Be familiar with the controls and the proper use of the

machine

• Before using, always visually inspect to see that the

blades, blade bolts and cutter assembly are not worn

or damaged. Replace worn or damaged blades and

bolts in sets to preserve balance. Replace damaged or

unreadable labels.

• Keep all nuts, bolts and screws tight to be sure the

product is in safe working condition.

• Check the functioning of the machine before each use

and, in case of a defect, have it repaired immediately by a

qualied person; never open the machine yourself

• Never operate the machine with a defective rear guard or

defective grass box

• When operating the machine without grass box, ensure

that the rear guard is in closed position (risk of injury

caused by rotating cutting blade)

• Always switch o the machine, remove battery pack, and

ensure that all moving parts have come to a complete

standstill

-whenever leaving the machine unattended

-before clearing jammed material

-before checking, cleaning or working on the machine

-after striking a foreign object

-whenever the machine starts vibrating abnormally

• Always keep hands and feet away from rotating

parts

• Keep away from the discharge opening at all times

• Switch on the motor according to instructions and with

feet well away from the cutting blade

• Never mow in the direct vicinity of persons (especially

children) and animals

• transportation when crossing surfaces other than grass,

and when transporting the product to and from the area

to be used.

• Do not tilt the product when switching on the motor,

except if the product has to be tilted for starting. In this

case, do not tilt it more than absolutely necessary and lift

only the part, which is away from the operator.

• Be careful during adjustment of the product to prevent

entrapment of the ngers between moving blades and

xed parts of the product.

• Always allow the machine to cool down before storing.

• When servicing the blades be aware that, even though

the power source is switched o, the blades can still be

moved.

• Check for blockage of the cutting blade

To prevent blockage, keep the cutting blade and mower

deck clean. Remove grass clippings, leaves, dirt and any

other accumulated debris before and after each use.

When blockage happens, stop the mower and remove

the battery, then remove any build-up of grass and leaves

on or around the drive shaft and motor fan (do not use

water). Wipe the mower clean with a damp cloth.

• Empty the grass bag before storage.

• Never use the machine when handle cord is damaged,

have it replaced by a qualied person

BATTERIES

• The battery supplied is partially charged (to ensure

Skil 0180 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info