Bedienungsanleitung Skil 0250 (Seite 12 von 120) (Alle Sprachen)

758630

Zoom out

Zoom in

Vorherige Seite

1/120

Nächste Seite

• Battery protection

The tool is suddenly being switched o or prevented from

being switched on, when

-the load is too high --> remove load and restart

-the battery temperature is not within the allowable

operating temperature range of -20 to +50°C --> 2

levels of the battery level indicator start ashing when

pressing button G qc; wait until battery has returned

within the allowable operating temperature range

-the battery is nearly empty (to protect against

deep discharge) --> a low battery level or ashing low

battery level qb is shown by the battery level indicator

when pressing button G; charge battery

! 



damaged

• Trimming

! ensure that the cutting area is free of stones,

debris and other foreign objects

! start trimming only when tool runs at full speed

-cut long grass in layers (always start from the top)

-only trim with the tip of the cutting line

-do not cut damp or wet grass

-prevent the cut grass from clogging the spool (do not

make heavy cuts)

-do not overload the tool

-carefully cut around trees and bushes, so that they do

not come into contact with the cutting line

-keep the tool away from solid objects in order to protect

the cutting line against excessive wear

-be aware of the kickback forces that occur when solid

objects are touched

• Holding and guiding the tool u

-for cutting long grass slowly swing the tool from right to

left and vice versa

-hold tool rmly with both hands, so you will have full

control of the tool at all times

-maintain a stable working position

-always hold the tool well away from your body

• Line feeding i

-tap trimmer head lightly on a solid surface while the

motor is running

! tap trimmer head on bare ground or hard soil,

when tapping in tall grass, the motor may overheat

-the cutting line will be released and cut o to the correct

length by line cutting blade K

! take care against injury from line cutting blade K

-feed the lines regularly to maintain full cutting circle

-when the motor runs without load and no grass is cut,

the cutting line is stuck, worn or broken; rewind or

replace the line

• Feeding the line manually

-switch o the tool and remove the battery

-press the trimmer head and pull the lines to feed the

line manually and check for proper installation

-after line feeding always return the tool to its normal

operating position before switching on

-when the motor runs without load and no grass is cut,

the cutting line is stuck, worn or broken; rewind or

replace the line

• Line replacement o

In case the cutting line fails to protrude from spool hole Q

! 

BATTERIES

• The battery supplied is partially charged (to ensure

full capacity of the battery, completely charge the battery

in the battery charger before using your power tool for the

rst time)

• Only use the following batteries and chargers with

this tool

-SKIL battery: BR1*31****

-SKIL charger: CR1*31****

• Do not use the battery when damaged; it should be

replaced

• Do not disassemble the battery

• Do not expose tool/battery to rain

• Permitted ambient temperature (tool/charger/battery):

-when charging 4...40°C

-during operation –20...+50°C

-during storage –20...+50°C

EXPLANATION OF SYMBOLS ON TOOL/BATTERY

3 Read the instruction manual before use

4 Batteries may explode when disposed of in re, so do not

burn battery for any reason

5 Store tool/charger/battery in locations where temperature

will not exceed 50°C

6 

debris (keep bystanders a safe distance away from work

area)

7 Wear protective glasses and hearing protection

8 Do not expose tool to rain

9 Do not dispose of electric tools and batteries together

with household waste material

USE

• Assembly instructions

-unfold hinge F and x as illustrated with 2 screws w

-mount the guide handle C as illustrated e

-guide handle C can be adjusted by loosening/

tightening knob D

-mount cutting guard J as illustrated with 2 screws r

! never use the tool without cutting guard J

• Charging battery

! read the safety warnings and instructions

provided with the charger

• Removing/installing the battery 2

• On/o t

-switch on tool by rst pressing knob A (= safety switch

which cannot be locked) and then pulling trigger B

-switch o tool by releasing trigger switch B

! 

continues to rotate for a few seconds

-allow the cutting line to stop rotating before switching

on again

! 

• Speed selection y

-set selector E to desired speed

• Battery level indicator q

-press the battery level indicator button G to show the

current battery level qa

! when the lowest level of the battery indicator

qb, the

battery is empty

! 

after pressing button G qc, the battery is not

within the allowable operating temperature range

Skil 0250 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info