Bedienungsanleitung Skil 0250 (Seite 13 von 120) (Alle Sprachen)

758630

Zoom out

Zoom in

Vorherige Seite

1/120

Nächste Seite

Tool operates intermittently

-internal wiring defective -> contact dealer/service

station

-on/o switch defective -> contact dealer/service station

Tool vibrates abnormally

-grass too high -> cut in stages

Tool does not cut

-line too short/broken o -> feed the line manually

Line cannot be fed

-spool empty -> inspect spool; rewind if necessary

-line entangled inside spool -> inspect spool; rewind if

necessary

Line is not cut o to correct length -> remove cover from

cutting blade

Line keeps breaking

-line entangled inside spool -> inspect spool; rewind if

necessary

-trimmer incorrectly used -> only trim with the tip of the

line; avoid stones, walls and other hard objects; feed

the line regularly

ENVIRONMENT

• Do not dispose of electric tools, batteries,

accessories and packaging together with household

waste material (only for EU countries)

-in observance of European Directive 2012/19/EC

on waste of electric and electronic equipment and

its implementation in accordance with national law,

electric tools that have reached the end of their life

must be collected separately and returned to an

environmentally compatible recycling facility

-symbol 9 will remind you of this when the need for

disposing occurs

! prior to disposal protect battery terminals with

heavy tape to prevent short-circuit

NOISE / VIBRATION

• Measured in accordance with EN 60335 the sound

pressure level of this tool is 75.0 dB(A) (uncertainty

K = 2.5 dB) and the sound power level 86.19 dB(A)

(uncertainty K = 1.7 dB), and the vibration 4.5 m/s² (triax

vector sum; uncertainty K = 1.5 m/s²)

• The vibration emission level has been measured in

accordance with a standardised test given in EN 60335;

it may be used to compare one tool with another and as

a preliminary assessment of exposure to vibration when

using the tool for the applications mentioned

-using the tool for dierent applications, or with dierent

or poorly maintained accessories, may signicantly

increase the exposure level

-the times when the tool is switched o or when it is

running but not actually doing the job, may signicantly

reduce the exposure level

! 

maintaining the tool and its accessories, keeping

your hands warm, and organizing your work

patterns

-only use SKIL line 2610S01057 with this tool (damage

due to other line will be excluded from warranty)

-insert the 5m long cutting line into spool hole Q and

push until it protrudes from the other side

-pull the line until equal amounts of line appear on both

sides

-press and rotate in the direction of the arrow L until

approx. 13 cm of line is left on both sides

• Remove line p

In case the cutting line fails to protrude from spool hole Q

! 

-press release buttons H to remove the spool cover

-remove the line from the spool

-align and press the spool cover until it snaps into place

-follow "Line replacement" instruction above

MAINTENANCE / SERVICE

• This tool is not intended for professional use

• Always switch o the tool, remove battery pack, and

ensure that all moving parts have come to a complete

standstill

• Always keep tool clean (especially ventilation slots R 2)

-clean the tool with a damp cloth (do not use cleaning

agents or solvents)

-clean line cutting blade K 2 and cutting guard J 2

after each use

-clean ventilation slots R 2 regularly with a brush or

compressed air

• Regularly check the condition of the cutting head and the

tightness of nuts, bolts and screws

• Regularly check for worn or damaged components and

have them repaired/replaced when necessary

• Storage a

-securely mount storage rail M on the wall with 2 screws

(not supplied) and horizontally leveled

-attach the storage adapter N and move it against the

mounting base of the storage rail M

-store the tool with the storage hole in the handle over

the tip of the storage adapter

• If the tool should fail despite the care taken in

manufacturing and testing procedures, repair should

be carried out by an after-sales service centre for SKIL

power tools

-send the tool undismantled together with proof of

purchase to your dealer or the nearest SKIL service

station (addresses as well as the service diagram of the

tool are listed on www.skil.com)

• Be aware that damage due to overload or improper

handling of the product will be excluded from the

warranty (for the SKIL warranty conditions see

www.skil.com or ask your dealer)

TROUBLESHOOTING

• The following listing shows problem symptoms, possible

causes and corrective actions (if these do not identify

and correct the problem, contact your dealer or service

station)

! in case of electrical or mechanical malfunction,



Tool does not operate

-empty battery -> charge battery

-hot battery -> let battery cool down

-internal fault -> contact dealer/service station

Skil 0250 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info