Bedienungsanleitung Skil 0480 (Seite 13 von 140) (Alle Sprachen)

797782

Zoom out

Zoom in

Vorherige Seite

1/140

Nächste Seite

! prior to disposal protect battery terminals with

heavy tape to prevent short-circuit

Only for UK

• Do not dispose of electric tools, accessories and

packaging together with household waste material

-in observance of on Waste Electric and Electronic

Equipment Regulations 2013 (SI 2013/3113), electric

tools that have reached the end of their life must be

collected separately and returned to an environmentally

compatible recycling facility

-symbol 9 will remind you of this when the need for

disposing occurs

! prior to disposal protect battery terminals with

heavy tape to prevent short-circuit

NOISE / VIBRATION

• Measured in accordance with EN 62841 the sound

pressure level of this tool is 82 dB(A) (uncertainty

K = 3 dB) and the sound power level 89 dB(A)

(uncertainty K = 4.1 dB), and the vibration < 2.5 m/s²

(triax vector sum; uncertainty K = 1.5 m/s²)

• The vibration emission level has been measured in

accordance with a standardised test given in EN 62841;

it may be used to compare one tool with another and as

a preliminary assessment of exposure to vibration when

using the tool for the applications mentioned

-using the tool for dierent applications, or with dierent

or poorly maintained accessories, may signicantly

increase the exposure level

-the times when the tool is switched o or when it is

running but not actually doing the job, may signicantly

reduce the exposure level

! protect yourself against the eects of vibration by

maintaining the tool and its accessories, keeping

your hands warm, and organizing your work

patterns

Taille-haie sans l 0480

INTRODUCTION

• Cet outil a été conçu pour tailler les haies et les buissons

et il est destiné à un usage domestique uniquement

• Cet outil n’est pas conçu pour un usage

professionnel.

• Lisez attentivement ce mode d’emploi avant

d’utiliser l’outil et conservez-le pour pouvoir vous y

référer ultérieurement

• Prêtez particulièrement attention aux consignes de

sécurité et aux avertissements ; sinon, vous risquez de

subir des blessures graves

• Vériez que toutes les pièces montrées sur le schéma

sont contenues dans l’emballage

• Lorsque des pièces manquent ou sont endommagées,

contactez votre revendeur

CARACTÉRISTIQUES TECHNIQUES 1

PIÈCES DE L’OUTIL 2

A Poignée arrière

B Bouton de blocage

• Regularly check for worn or damaged components and

have them repaired/replaced when necessary

• Sharpening the cutting blades

! remove battery from tool

-sharpen the cutting blades with a small and smooth le,

in case a solid object damaged them

-we advise you, however, to have the blades sharpened

by a specialist

-lubricate the cutting blades after sharpening

• Storage

-use blade cover H when storing the tool

-before storing the tool, wipe o the cutting blades with

an oil-soaked rag to prevent corrosion

• If the tool should fail despite the care taken in

manufacturing and testing procedures, repair should

be carried out by an after-sales service centre for SKIL

power tools

-send the tool undismantled together with proof of

purchase to your dealer or the nearest SKIL service

station (addresses as well as the service diagram of the

tool are listed on www.skil.com)

• Be aware that damage due to overload or improper

handling of the product will be excluded from the

warranty (for the SKIL warranty conditions see

www.skil.com or ask your dealer)

TROUBLESHOOTING

• The following listing shows problem symptoms, possible

causes and corrective actions (if these do not identify

and correct the problem, contact your dealer or service

station)

! in case of electrical or mechanical malfunction,

immediately switch o the tool and remove battery

Motor does not start or stops suddenly

-empty battery -> charge battery

-hot battery -> let battery cool down

-cutting blades jammed -> clear jammed material

-internal fault -> contact dealer/service station

Tool operates intermittently

-on/o switch defective -> contact dealer/service station

-internal wiring defective -> contact dealer/service

station

-impeller blocked by foreign object -> remove blockage

Motor runs but blades remain stationary

-internal fault -> contact dealer/service station

Cutting blades hot

-cutting blades blunt -> have blades sharpened

-cutting blades have dents -> have blades inspected

-too much friction due to lack of lubricant -> lubricate

blades

ENVIRONMENT

Only for EU countries

• Do not dispose of electric tools, accessories and

packaging together with household waste material

-in observance of European Directive 2012/19/EC

on waste of electric and electronic equipment and

its implementation in accordance with national law,

electric tools that have reached the end of their life

must be collected separately and returned to an

environmentally compatible recycling facility

-symbol 9 will remind you of this when the need for

disposing occurs

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Skil 0480 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info