Bedienungsanleitung Skil 0511 (Seite 7 von 124) (Alle Sprachen)

758619

Zoom out

Zoom in

Vorherige Seite

1/124

Nächste Seite

• Do not direct the laser beam at persons or animals and do not stare into the

direct or reflected laser beam yourself, not even from a distance (you could

blind somebody, cause accidents or damage your eyes) 3

• If laser radiation strikes your eye, you must deliberately close your eyes

and immediately turn your head away from the beam

• Do not make any modifications to the laser equipment

• Have the measuring tool repaired only through qualified specialists using

original spare parts (this ensures that the safety of the measuring tool is

maintained)

• Do not allow children to use the laser measuring tool without supervision

(they could unintentionally blind other persons or themselves)

• Do not operate the measuring tool in explosive environments, such as in

the presence of flammable liquids, gases or dusts (sparks can be created in

the measuring tool which may ignite the dust or fumes)

EXPLANATION OF SYMBOLS ON TOOL

2 Read the instruction manual before use

3 Laser radiation / Do not stare into beam / Class 2 laser product

4 Do not dispose of electric tools and batteries together with household waste

material

USE

• Inserting/replacing the batteries

- alkali-manganese batteries are recommended for the measuring tool

- do not use rechargeable batteries

- to open the battery lid A, press on the latch B and fold the battery lid up

- insert 2 x AA/LR06 batteries (pay attention to correct polarisation)

- always replace all batteries at the same time

- only use batteries from one brand and with the identical capacity

- remove the batteries from the measuring tool when not using it for

extended periods (when storing for extended periods, the batteries can

corrode and self-discharge)

• On/o

- to switch on the measuring tool, press on/o button C (immediately after

switching on, the measuring tool sends a laser beam out of exit opening D)

! do not point the laser beam at persons or animals and do not stare into

the laser beam yourself, not even from a large distance

- to switch o the measuring tool, press on/o button C repeatedly until indicator

E goes out

- slide switch F into position 6 to lock the levelling unit

- do not leave the switched on measuring tool unattended and switch the

measuring tool off after use (other persons could be blinded by the laser

beam)

- when not using the measuring tool, switch it o in order to extend the battery life

• Operating modes

- all modes can be selected WITH automatic levelling (position 5) and WITHOUT

automatic levelling (position 6)

- press button C repeatedly until the desired mode is set

1) Cross-line mode: the measuring tool generates a horizontal and a vertical

laser line 7 8

2) Horizontal mode: the measuring tool generates a horizontal laser line 9

3) Vertical mode: the measuring tool generates a vertical laser line 0

• Working with automatic levelling

- position the measuring tool on a level, rm support or attach it to tripod N or to

the supplied holder

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Skil 0511 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info