Bedienungsanleitung Skil 0730 (Seite 6 von 112) (Alle Sprachen)

591166

Zoom out

Zoom in

Vorherige Seite

1/112

Nächste Seite



Line trimmer 0730

INTRODUCTION

• This tool is intended for the cutting of grass and weeds

under bushes as well as on slopes and edges that can

not be reached with a lawn mower

• This tool is not intended for professional use

• Check whether the packaging contains all parts as

illustrated in drawing 2

• When parts are missing or damaged, please contact your

dealer

• Readthisinstructionmanualcarefullybeforeuse

andsaveitforfuturereference3

• Payspecialattentiontothesafetyinstructionsand

warnings;failuretofollowthesemayresultin

seriousinjury

TECHNICAL DATA 1

TOOL ELEMENTS 2

A Cutting guard

B Guide handle

C Cord restraint

D Locking sleeve

E Telescopic tube

F Trigger switch

G Cutting blade cover

H Button for line feeding

J Line cutting blade

K Spool cap

L Ventilation slots

M Storage rail (screwsnotsupplied)

N Storage hook

SAFETY

SPECIFICSAFETYINSTRUCTIONSFORLINE

TRIMMERS

GENERAL

• Be familiar with the controls and the proper use of the tool

• The user is responsible for accidents or hazards

occurring to other people or their property

• Only use the tool when the ambient temperature is

between 0°C and 40°C

• Never mount metal cutting elements onto this tool

PERSONALSAFETY

• This tool is not intended for use by persons (including

children) with reduced physical, sensory or mental

capabilities, or lack of experience and knowledge, unless

they have been given supervision or instruction

concerning use of the tool by a person responsible for

their safety

• Ensure that children do not play with the tool

• Never allow children or people who are not familiar with

the operating instructions to use the tool

• Keepyourfingersawayfromthelinecuttingblade

integratedinthecuttingguard

• Keep hands and feet away from the cutting lines while

trimming, especially when switching on the tool

• Always wear eye protection, long trousers and sturdy

shoes when operating the tool

• Never operate the tool in the direct vicinity of persons;

stop using the tool when persons (especially children) or

pets are nearby

• Never operate the tool when you are tired, sick or under

the inuence of alcohol or other drugs

ELECTRICAL SAFETY

• Always check that the supply voltage is the same as the

voltage indicated on the nameplate of the tool (tools with

a rating of 230V or 240V can also be connected to a

220V supply)

• Inspect the cord periodically and have it replaced by a

qualied person, if damaged

• Inspect the extension cord periodically and replace it, if

damaged (inadequateextensioncordscanbe

dangerous)

• Only use an extension cord which is intended for outdoor

use and equipped with a watertight plug and coupling-

socket

• Use completely unrolled and safe extension cords with a

capacity of 16 Amps (U.K. 13 Amps)

• When operating the tool use a residual current device

(RCD) with a triggering current of 30 mA maximum

• Do not run over, crush or pull the (extension) cord

• Protect the (extension) cord from heat, oil and sharp

edges

• Keepthe(extension)cordawayfromtherotating

cuttinglines

• Always switch o tool and disconnect plug from power

source if the power supply cord or the extension cord is

cut, damaged or entangled (donottouchthecord

beforedisconnectingtheplug)

BEFORE USE

• Only use the tool in daylight or with appropriate articial

lighting

• Check the functioning of the tool before each use and

after any impact; in case of a defect, have it repaired

immediately by a qualied person (never open the tool

yourself)

• Before use, thoroughly inspect the cutting area and

remove any object that the tool may sling during cutting

(such as stones, loose pieces of wood, etc.)

DURING USE

• Never use the tool when cord is damaged; have it

replaced by a qualied person

• Never operate the tool with a damaged cutting guard or

without the cutting guard mounted

• Thecuttinglinescontinuetorotateforashorttime

afterthetoolisswitchedoff

• Do not cut grass which is not on the ground (e.g. on walls

or rocks)

• Do not cross roads or gravel paths with the tool still

running

• Do not get distracted and always concentrate on what

you are doing

• Always disconnect plug from power source

- whenever leaving the tool unattended

- before clearing jammed material

- before checking, cleaning or working on the tool

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Skil 0730 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info