Bedienungsanleitung Skil 0730 (Seite 7 von 112) (Alle Sprachen)

591166

Zoom out

Zoom in

Vorherige Seite

1/112

Nächste Seite

- after striking a foreign object

- whenever the tool starts vibrating abnormally

• Always ensure that the ventilation openings are kept clear

of debris

AFTER USE

• Alwaysswitchofftoolanddisconnectplugfrom

powersourcebeforemakingadjustments,changing

spools,cleaningorleavingthetoolunattendedfor

anyperiod

• Store the tool indoors in a dry and locked-up place, out

of reach of children

EXPLANATIONOFSYMBOLSONTOOL

3Warning! Read the instruction manual

4 Do not expose tool to rain

5 Wear protective glasses

6 Payattentiontotheriskofinjurycausedbyflying

debris (keep bystanders a safe distance away from work

area)

7 Immediately disconnect the plug if the (extension) cord is

damaged or cut through while working

8 Double insulation (no earth wire required)

WHEN CONNECTING NEW 3-PIN PLUG (U.K. ONLY):

• If for any reason the old plug is cut o the cord of this tool,

it must be disposed of safely and not left unattended

• Do not connect the blue (= neutral) or brown (= live) wire

in the cord of this tool to the earth terminal of the plug

USE

• Cutting guard 0

- mount cutting guard A as illustrated with round head

screw supplied

! neverusethetoolwithoutcuttingguardA

• Mounting/adjusting guide handle !

- mount guide handle B as illustrated with 4 screws

supplied

! firmlytightenall4screws

• Cord restraint @

- hook the loop in the extension cord over restraint C as

illustrated

- pull tight to secure the extension cord

• Height adjustment #

For adjusting the tool height so that your front arm is

straight when trimming

- loosen locking sleeve D 2 by turning it clockwise

- extend tube E 2 to the desired height

- tighten locking sleeve D 2 by turning it counter-

clockwise

• On/o $

- switch on tool by pressing trigger switch F

- switch o tool by releasing trigger switch F

! afterswitchingoffthetoolthecuttinglines

continuetorotateforafewseconds

- allow the cutting lines to stop rotating before switching

on again

! donotrapidlyswitchonandoff

• Trimming

! ensurethattheredcoverG2isremovedfrom

thelinecuttingbladebeforeusingthetool

! ensurethatthecuttingareaisfreeofstones,

debrisandotherforeignobjects

! starttrimmingonlywhentoolrunsatfullspeed

- start trimming near the mains socket and move away

while working

- cut long grass in layers (always start from the top)

- only trim with the tip of the cutting line

- do not cut damp or wet grass

- prevent the cut grass from clogging the spool (do not

make heavy cuts)

- do not overload the tool

- carefully cut around trees and bushes, so that they do

not come into contact with the cutting lines

- keep the tool away from solid objects in order to

protect the cutting lines against excessive wear

- be aware of the kickback forces that occur when solid

objects are touched

• Holding and guiding the tool %

- for cutting long grass slowly swing the tool from right to

left and vice versa

- for cutting shorter grass tilt the tool as illustrated

- turn the tool 180° for trimming edges

- hold tool rmly with both hands, so you will have full

control of the tool at all times

- maintain a stable working position

- always hold the tool well away from your body

• Line feeding ^

- tap button H lightly on the ground (preferably on a

solid surface) while the motor is running

- two cutting lines will be released and cut o to the

correct length by line cutting blade J

! ensurethattheredcoverG2isremovedfrom

thelinecuttingbladebeforeusingthetool

! takecareagainstinjuryfromlinecuttingbladeJ

- after line feeding always return the tool to its normal

operating position before switching on

- feed the lines regularly to maintain full cutting circle

- when the motor runs without load and no grass is cut,

the cutting lines are worn or broken; rewind the spool

or replace the spool system

• Rewinding spool &

In case the cutting lines fail to protrude from spool cap K

! switchoffthetoolanddisconnecttheplug

- remove spool system from tool and take out spool from

spool cap K

- tightly rewind both cutting lines evenly in layers in

arrow direction

- insert both lines into spool slots X and ensure that they

are securely in place (leave sucient length of line)

- thread both lines through spool holes Y before placing

the rewound spool into spool cap K

! ensurethatthespoolislocatedsecurelyinplace,

thenreleasebothlinesfromslotsXbypulling

themfirmly

- mount spool system onto tool (turnspoolclockwise

untilitclicksintoplace) *

• Replacing spool system *

! switchoffthetoolanddisconnecttheplug

- simply remove/mount old/new spool system as

illustrated

- only use SKIL spool system 2610Z01354 with this tool

(damageduetousingotherspoolsystemswillbe

excludedfromthewarranty)

Skil 0730 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info