Bedienungsanleitung Skil 0770 (Seite 7 von 96) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

480089

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite



Shredder 0770

INTRODUCTION

• This tool is not intended for professional use

• This tool is intended for cutting brous and woody garden

waste for composting

• Check whether the packaging contains all parts as

illustrated in drawing 2

• When parts are missing or damaged, please contact

your dealer

• Read this instruction manual carefully before use and

save it for future reference 3

• Pay special attention to the safety instructions and

warnings; failure to follow these may result in

serious injury

TECHNICAL SPECIFICATIONS 1

✱) The S6 operating mode (P40 = 40%) indicates a load

prole of 4 min load and 6 min idle time (for practical

application, continuous operation is permitted)

TOOL ELEMENTS 2

A Wrench (2)

B Collection bag

C Outlet

D Prodder holder

E On/o switch

F Securing knob

G Button for restarting

H Feed intake opening

J Ventilation slots

K Prodder

L Hex key

M Metal plate

N Safety lock

SAFETY

SPECIFIC SAFETY INSTRUCTIONS FOR SHREDDERS

EXPLANATION OF SYMBOLS ON TOOL

3 Read the instruction manual before use

4 Switch off and disconnect plug before cleaning/

maintenance or if (extension) cord is damaged

or entangled

5 DANGER Rotating blades; keep hands out of openings

while tool is running

6 Pay attention to the risk of injury caused by flying

debris (keep bystanders a safe distance away from

work area)

7 Wait until all moving tool components have come to a

complete standstill before touching them

8 Wear protective gloves

9 Wear protective glasses and hearing protection

0 Do not expose tool to rain

! Double insulation (no earth wire required)

@ Do not dispose of the tool together with household

waste material

# Plugs and sockets situated near the work site or outdoors

should be class IP X4 of BS 5490 to provide adequate

protection against ingress of water, etc. and cable entries

require eective sealing

GENERAL

• This tool is not intended for use by persons (including

children) with reduced physical, sensory or mental

capabilities, or lack of experience and knowledge, unless

they have been given supervision or instruction

concerning use of the tool by a person responsible for

their safety

• Ensure that children do not play with the tool

• Be familiar with the controls and the proper use of the tool

• Never allow children or people who are not familiar with

the operating instructions to use the tool (local

regulations can restrict the age of the operator)

• Never operate the tool in the direct vicinity of persons;

stop using the tool while persons (especially children) or

pets are nearby

• The user is responsible for accidents or hazards

occurring to other people or their property

• Keep all guards and deectors in place and in good

working condition

• Always switch o the tool, allow the cutting blade to stop

and disconnect the plug

- whenever leaving the tool unattended

- before clearing jammed material

- before checking, cleaning or working on the tool

! before mounting or removing the collection bag

ELECTRICAL SAFETY

• Always check that the supply voltage is the same as the

voltage indicated on the nameplate of the tool

• Inspect the cord periodically and have it replaced by a

qualied person, if damaged

• Inspect the extension cord periodically and replace it, if

damaged (inadequate extension cords can be

dangerous)

• When operating the tool use a residual current device

(RCD) with a triggering current of 30 mA maximum

• Only use an extension cord of types H05VV-F or

H05RN-F which is intended for outdoor use and

equipped with a watertight plug and coupling-socket

• Always switch o tool and disconnect plug from power

source if the power supply cord or the extension cord is

cut, damaged or entangled (do not touch the cord

before disconnecting the plug)

• A damaged power cord shall be replaced at a SKIL

service centre only in order to avoid a hazard

• Use completely unrolled and safe extension cords with a

capacity of 16 Amps (U.K. 13 Amps)

• Protect the (extension) cord from heat, oil and

sharp edges

• Do not run over, crush or pull the (extension) cord

• Only use extension cords with a maximum length of 20

metres (1,5 mm²) or 50 metres (2,5 mm²)

PERSONAL SAFETY

• Do not operate the tool when barefoot or wearing open

sandals; always wear sturdy shoes and long trousers

• Avoid wearing loose-tting clothing that is loose-tting,

hanging cords or ties

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Skil 0770 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info