Bedienungsanleitung Skil 1415 AC (Seite 11 von 172) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

482561

Zoom out

Zoom in

Vorherige Seite

1/172

Nächste Seite

• Holding and guiding the tool 0

- pencil grip for precision work (engraving)

- one-hand grip for less precise work (grinding)

- support grip for additional control/comfort

- do not apply too much pressure on the tool; let the

speed do the work for you

• Support grip !

- can be adjusted as illustrated

- can be mounted in 4 dierent positions

• Spot light (not standard included) @

Switch on/o spotlight J by turning knob K counter-

clockwise/clockwise

• Flexible shaft (not standard included) #

- mount exible shaft as illustrated

- use exible shaft for hard-to-reach places

Changing accessories when using exible shaft $

- pull sleeve L down (= lock spindle) and hold it while you

turn collet nut D by hand until the spindle lock prevents

further rotation and loosen collet nut D with wrench E

- insert an accessory in collet C

- pull sleeve L down (= lock spindle) and hold it while

you tighten collet nut D with wrench E

• Mounting stand (not standard included) %

- mount stand on a workbench or table-top with a

maximum thickness of 60 mm

- adjust height of stand by turning tubes M counter-

clockwise, pulling them to desired height, and turning

them clockwise

- adjust height of suspension bracket N by loosening

knob P, adjusting suspension bracket to desired

height, and tightening knob P

- attach tool to suspension bracket with hook Q

• Assembly of specic accessories ^

MAINTENANCE / SERVICE

• Always keep tool and cord clean (especially ventilation

slots H 2)

! disconnect the plug before cleaning

• If the tool should fail despite the care taken in manu-

facturing and testing procedures, repair should be carried

out by an after-sales service centre for SKIL power tools

- send the tool undismantled together with proof of

purchase to your dealer or the nearest SKIL service

station (addresses as well as the service diagram of

the tool are listed on www.skileurope.com)

ENVIRONMENT

• Do not dispose of electric tools, accessories and

packaging together with household waste material

(only for EU countries)

- in observance of European Directive 2002/96/EC on

waste of electric and electronic equipment and its

implementation in accordance with national law,

electric tools that have reached the end of their life

must be collected separately and returned to an

environmentally compatible recycling facility

- symbol & will remind you of this when the need for

disposing occurs

DECLARATION OF CONFORMITY

• We declare under our sole responsibility that this product

is in conformity with the following standards or

standardized documents: EN 60745, EN 55014,

EN 61000 in accordance with the provisions of the

directives 2006/95/EC, 2004/108/EC, 2006/42/EC

• Technical file at: SKIL Europe BV (PT-SEU/PJE),

4825 BD Breda, NL

ÊÆÇÎ¹Æ¼½ÊÄÇÇÌ

Á»½Ê½ËÁ¼½ÆÌ

È½Ê¹ÌÁÇÆËŵÆ¿ÁÆ½½ÊÁÆ¿

ÍÊÇÈ½Ɠˁ˅ʿ˂Ê½¼¹Ɠ

¹ÆÊÇÅÅ½Ä½Æ

ÈÈÊÇÎ¹Ä¹Æ¹¿½Ê

08.12.2011

NOISE/VIBRATION

• Measured in accordance with EN 60745 the sound

pressure level of this tool is 72 dB(A) (standard deviation:

3 dB) and the vibration 2.9 m/s² (hand-arm method;

uncertainty K = 1.5 m/s²)

• The vibration emission level has been measured in

accordance with a standardised test given in EN 60745; it

may be used to compare one tool with another and as a

preliminary assessment of exposure to vibration when

using the tool for the applications mentioned

- using the tool for dierent applications, or with dierent

or poorly maintainted accessories, may signicantly

increase the exposure level

- the times when the tool is switched o or when it is

running but not actually doing the job, may signicantly

reduce the exposure level

! protect yourself against the effects of vibration

by maintaining the tool and its accessories,

keeping your hands warm, and organizing your

work patterns



Outil rotatif à grande vitesse 1415

INTRODUCTION

• Cet outil est conçu pour le meulage, ponçage,

tronçonnage, gravure, polissage et perçage de haute

précision des diérents matériaux

• SKIL ne fournit pas d’accessoires de rechange pour cet

outil, mais recommande l’achat d’accessoires Ø 2,4 mm/

Ø 3,2 mm DREMEL

• Lisez et conservez ce manuel d’instruction 3

SPECIFICATIONS TECHNIQUES 1

ELEMENTS DE L’OUTIL 2

A Interrupteur marche/arrêt

B Bouton de blocage de l’arbre

C Pince

D Chapeau

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Skil 1415 AC Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info