Bedienungsanleitung Skil 2900 (Seite 6 von 124) (Alle Sprachen)

519345

Zoom out

Zoom in

Vorherige Seite

1/124

Nächste Seite

d) Store idle power tools out of the reach of children

and do not allow persons unfamiliar with the power

tool or these instructions to operate the power tool.

Power tools are dangerous in the hands of untrained

users.

e) Maintain power tools. Check for misalignment or

binding of moving parts, breakage of parts and any

other condition that may affect the power tool’s

operation. If damaged, have the power tool repaired

before use. Many accidents are caused by poorly

maintained power tools.

f) Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting edges are less

likely to bind and are easier to control.

g) Use the power tool, accessories and tool bits etc., in

accordance with these instructions, taking into

account the working conditions and the work to be

performed. Use of the power tool for operations dierent

from those intended could result in a hazardous situation.

5) BATTERY TOOL USE AND CARE

a) Recharge only with the charger specified by the

manufacturer. A charger that is suitable for one type of

battery pack may create a risk of re when used with

another battery pack.

b) Use power tools only with specifically designated

battery packs. Use of any other battery packs may

create a risk of injury and re.

c) When battery pack is not in use, keep it away from

other metal objects like paper clips, coins, keys,

nails, screws, or other small metal objects that can

make a connection from one terminal to another.

Shorting the battery terminals together may cause burns

or a re.

d) Under abusive conditions, liquid may be ejected

from the battery; avoid contact. If contact

accidentally occurs, flush with water. If liquid

contacts eyes, additionally seek medical help. Liquid

ejected from the battery may cause irritation or burns.

6) SERVICE

a) Have your power tool serviced by a qualified repair

person using only identical replacement parts. This

will ensure that the safety of the power tool is maintained.

SAFETY INSTRUCTIONS FOR CORDLESS SCISSORS

GENERAL

• Do not use tool/charger when damaged; take it to one of

the ocially registered SKIL Service Stations for a safety

check

• Do not leave the tool unattended

• This tool is not a toy; keep it out of reach of children

• This tool should not be used by people under the age of

16 years

• Do not clamp the tool in a vice

• Do not expose tool/charger/battery to rain

• Do not carry or suspend the charger by the cord

• Never pull the charger cord to disconnect the charger

from the power source

• Keep the charger cord away from heat, oil and sharp

edges

ACCESSORIES

• SKIL can assure awless functioning of the tool only

when original accessories are used

BEFORE USE

• Always check that the supply voltage is the same as the

voltage indicated on the nameplate of the charger

(chargers with a rating of 230V or 240V can also be

connected to a 220V supply)

• Check the functioning of the tool before each use and, in

case of a defect, have it repaired immediately by a

qualied person; never open the tool yourself

DURING USE

• Keephandsawayfrommovingcuttingblades

• Keep hands away from cutting area; never reach

underneath the material for any reason while cutting

• Ensure that no material or surface under the cutting area

can be damaged by the cutting blades

• Hold tool by insulated gripping surface when performing

an operation where the cutting blades may contact

hidden wiring; contact with a “live” wire will make exposed

metal parts of the tool “live” and shock the operator

• In case of electrical or mechanical malfunction,

immediately switch o the tool or unplug charger from

power source

AFTER USE

• Remove battery from tool before making any adjustments

or changing accessories

• Store tool/charger in locations where temperature will not

exceed 40°C or drop below 0°C

CHARGING/BATTERIES

• Charge battery only with the charger that is supplied with

the tool

• Never charge battery outdoors 4

• Do not charge battery in damp or wet environments

• Do not use charger when cord or plug is damaged; cord

or plug should be replaced immediately at one of the

ocially registered SKIL Service Stations

• Do not use battery when damaged; it should be replaced

immediately

• Do not disassemble charger or battery

• Batteries may explode when disposed of in re, so do not

burn battery for any reason

EXPLANATION OF SYMBOLS ON CHARGER/BATTERY

3 Read the instruction manual before use

4 Only use the charger indoors

5 Double insulation (no earth wire required)

6 Fail-safe isolating transformer (the power source is

electrically separated from the transformer output)

7 Automatic shut-o when charger gets too hot (thermic

fuse blows and charger becomes useless)

8 Incorrect polarity of the charger connection could cause

a hazard (only charge the battery with the charger

supplied)

9 Do not dispose of the charger together with household

waste material

0 Do not dispose of the battery together with household

waste material

! NiMH technology provides more energy in a less

environment-polluting way

USE

• On/o @

- switch on the tool by pushing switch A forward

- lock the switch for continuous use by pushing switch A

further forward until it snap-locks

Skil 2900 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Skil 2900

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info