Bedienungsanleitung Skil 3550 (Seite 13 von 188) (Alle Sprachen)

758586

Zoom out

Zoom in

Vorherige Seite

1/188

Nächste Seite

-raise/lower foot K until desired cutting depth is set on

scale using indicator L

-tighten knob J

• Battery level indicator 8

-press the battery level indicator button AC to show the

current battery level.

• Adjusting cutting angle (0-50°) 9

-loosen knob M

-tilt tool until desired cutting angle is set on scale using

indicator N

-tighten knob M

! 

correspond with value on cutting depth scale

• 90° Cutting angle check 9

-adjust and tighten foot K to maximum cutting depth 7

-adjust and tighten cutting angle to 0°

-check for a 90° angle between the blade and bottom of

foot with a square

-if adjustment is needed, loosen knob M and use

adjustment screw P as illustrated

• Line-of-cut indicator Q q

-for guiding tool along desired line of cut marked on the

workpiece

-for a straight 0° cut or a 45° bevel cut use the indicator

line concerned

! the wide part of the foot should rest on the



! 



! 

cut

• Dust suction w

For using vacuum cleaner

-connect vacuum cleaner hose to vacuum cleaner

adapter R

! never let the vacuum cleaner hose interfere with

the lower guard or the cutting operation

Dust bag

-mount dust bag AD

• Operating the tool

-mount battery

-always hold handle S rmly with one hand and handle T

rmly with the other hand

-place tool with front end of foot at on workpiece

! ensure that the saw teeth are not engaged into the



-switch on tool by rst pressing knob W (= safety switch

which cannot be locked) and then pulling trigger Y

! 



-lower guard F opens automatically when saw blade

enters the workpiece (open lower guard manually by

using lever G only for special cuts such as plunge cuts)

! 



tips)

! 

coloured grip area(s)

-after completing the cut switch o tool by releasing

trigger Y

! 





• After switching o your circular saw, never stop the

rotation of the saw blade by a lateral force applied

against it

BATTERIES

• (to ensure

full capacity of the battery, completely charge the battery

in the battery charger before using your power tool for the

rst time)

• 

this tool

-SKIL battery: BR1*31****

-SKIL charger: CR1*31****

• Do not use the battery when damaged; it should be

replaced

• Do not disassemble the battery

• Do not expose tool/battery to rain

• Permitted ambient temperature (tool/charger/battery):

-when charging 4...40°C

-during operation –20...+50°C

-during storage –20...+50°C

EXPLANATION OF SYMBOLS ON TOOL/BATTERY

3 Read the instruction manual before use

4 Batteries may explode when disposed of in re, so do not

burn battery for any reason

5 Store tool/charger/battery in locations where temperature

will not exceed 50°C

6 Do not dispose of electric tools and batteries together

with household waste material

USE

• Charging battery

! 

provided with the charger

• Removing/installing the battery 2

• Mounting saw blade 2

! 

-take hex key A from storage B

-push spindle-lock button C and hold it while

you remove blade bolt D by turning hex key A

COUNTERCLOCKWISE (= in same direction as arrow

printed on saw blade)

! 

standstill

-release spindle-lock button C

-remove ange E

! 



-open lower guard F with lever G and hold it while you

mount saw blade with saw teeth and arrow printed on

saw blade pointing in same direction as arrow on upper

guard

-release lower guard F

-mount ange E

-push spindle-lock button C and hold it while you

tighten blade bolt with hex key 1/8 turn past nger tight

(ensures slippage of saw blade when it encounters

excessive resistance thus reducing motor overload and

saw kickback)

-release spindle-lock button C

• Adjusting cutting depth (0-61 mm) 7

-for an optimal quality cut the saw blade should not

extend more than 3 mm below the workpiece

-loosen knob J

Skil 3550 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info