Bedienungsanleitung Skil 7362 (Seite 10 von 108) (Alle Sprachen)

758394

Zoom out

Zoom in

Vorherige Seite

1/108

Nächste Seite

its implementation in accordance with national law,

electric tools that have reached the end of their life

must be collected separately and returned to an

environmentally compatible recycling facility

-symbol 5 will remind you of this when the need for

disposing occurs

NOISE / VIBRATION

• Measured in accordance with EN 62841 the sound

pressure level of this tool is 85.1 dB(A) and the sound

power level 96.1 dB(A) (uncertainty K = 3 dB), and

the vibration 6.4 m/s² (triax vector sum; uncertainty

K = 1.5 m/s²)

• The vibration emission level has been measured in

accordance with a standardised test given in EN 62841;

it may be used to compare one tool with another and as

a preliminary assessment of exposure to vibration when

using the tool for the applications mentioned

-using the tool for dierent applications, or with dierent

or poorly maintained accessories, may signicantly

increase the exposure level

-the times when the tool is switched o or when it is

running but not actually doing the job, may signicantly

reduce the exposure level

! 

maintaining the tool and its accessories, keeping

your hands warm, and organizing your work

patterns

Ponceuse vibrante 7362

INTRODUCTION

• Cet outil sert au ponçage et au polissage à sec du bois,

des surfaces peintes, du plastique et du mastic

• Cet outil n’est pas conçu pour un usage professionnel

• Lisez et conservez ce manuel d’instruction 3

CARACTERISTIQUES TECHNIQUES 1

ELEMENTS DE L’OUTIL 2

A Interrupteur marche/arrêt

B Réservoir à poussière

C Adaptateur de l’aspirateur*

D Perforatrice de feuilles*

E Molette de réglage de la vitesse de ponçage

F Fentes de ventilation

* NON FOURNI EN STANDARD

SECURITE

AVERTISSEMENTS DE SECURITE GENERAUX POUR

L’OUTIL ELECTRIQUE

-AVERTISSEMENT Lisez tous les avertissements

de sécurité, toutes les instructions, illustrations et

caractéristiques fournies avec cet outil électrique.

Le non-respect du suivi de toutes les instructions reprises

ci-dessous peut provoquer un électrochoc, un incendie et/ou

des blessures graves.

-connect vacuum cleaner hose to vacuum cleaner

adapter C 9b

• Speed control

For optimal sanding results on dierent materials

-with wheel E 2 you can set the desired sanding speed

-adjust speed to grit size used

-before starting a job, nd the optimal speed and grit by

testing out on spare material

• Holding and guiding the tool q

! while working, always hold the tool at the grey-

coloured grip area(s)

-guide the tool parallel to the working surface

! do not apply too much pressure on the tool; let the

sanding surface do the work for you

-do not tilt the tool in order to avoid unwanted sanding

marks

-keep ventilation slots F 2 uncovered

APPLICATION ADVICE

• Move the tool in straight movements in line with the grain

-for sanding bare wood surfaces

-for extra ne nishing

• Never use the same sanding sheet for wood and metal

• Recommended sanding sheet grits:

-for removing paint and for sanding of extremely rough

wood use coarse grit sizes (40, 60)

-for sanding of rough or plain wood use medium grit

sizes (80, 100, 120)

-for smoothing of wood and surfaces with old paint as

well as for nishing of bare wood use ne grit sizes

(180, 240, 320)

• Use dierent grit sizes when the working surface is

rough:

-start sanding with coarse or medium grit

-nish with ne grit

• For more information see www.skil.com

MAINTENANCE / SERVICE

• This tool is not intended for professional use

• Always keep tool and cord clean (especially ventilation

slots F 2)

-remove adhering sanding dust with a brush

! disconnect the plug before cleaning

• If the tool should fail despite the care taken in

manufacturing and testing procedures, repair should

be carried out by an after-sales service centre for SKIL

power tools

-send the tool undismantled together with proof of

purchase to your dealer or the nearest SKIL service

station (addresses as well as the service diagram of the

tool are listed on www.skil.com)

• Be aware that damage due to overload or improper

handling of the tool will be excluded from the warranty

(for the SKIL warranty conditions see www.skil.com or

ask your dealer)

ENVIRONMENT

• Do not dispose of electric tools, accessories and

packaging together with household waste material

(only for EU countries)

-in observance of European Directive 2012/19/EC

on waste of electric and electronic equipment and

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Skil 7362 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info