Bedienungsanleitung Skil 7460 aa (Seite 8 von 108) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

390161

Zoom out

Zoom in

Vorherige Seite

1/108

Nächste Seite

- the pressure control feature is specically designed for

fast sanding at maximum sanding speed (speed

control setting 7), for it is the need for fast sanding that

provokes applying too much pressure

! be aware that the working of the pressure control

feature is not guaranteed when sanding at lower

speed control settings (1-6)

• On/o

- before switching on the tool, you should place it with

the entire sanding surface on the workpiece

- when switching on, do not apply too much pressure on

the tool

- switch on/o the tool by pulling/releasing trigger F

! be aware of the sudden impact when the tool is

switched on

! before switching off the tool, you should lift it

from the workpiece

• Switch lock

- pull trigger F 2

- press knob G 2 with your thumb

- release the trigger

- unlock the switch by pulling again trigger F 2 and then

releasing it

• Speed control 7 (7460)

For optimal sanding results on dierent materials

- with wheel H 2 you can set the desired sanding

speed

- always adjust speed to grit size used

- before starting a job, nd the optimal speed and grit by

testing out on spare material

• Holding and guiding the tool 8

! while working, always hold the tool at the

grey-coloured grip area(s)

- guide the tool parallel to the working surface and move

it in circles or in a cross pattern

! do not apply too much pressure on the tool; let

the sanding surface do the work for you

- do not tilt the tool in order to avoid unwanted sanding

marks

- keep ventilation slots K 2 uncovered

• Sanding

- the amount of material removed is determined by the

speed of the sanding disc

- the speed of the sanding disc diminishes relative to

the pressure applied to the tool

APPLICATION ADVICE

• For determining the optimal grit (and speed), table 9 can

be used as reference

! always test out first on a piece of scrap material

• For more tips see www.skileurope.com

MAINTENANCE / SERVICE

• This tool is not intended for professional use

• Always keep tool and cord clean (especially ventilation

slots K 2)

- remove adhering sanding dust with a brush

! disconnect the plug before cleaning

• If the tool should fail despite the care taken in

manufacturing and testing procedures, repair should be

carried out by an after-sales service centre for SKIL

power tools

- send the tool undismantled together with proof of

purchase to your dealer or the nearest SKIL service

station (addresses as well as the service diagram of

the tool are listed on www.skileurope.com)

ENVIRONMENT

• Do not dispose of electric tools, accessories and

packaging together with household waste material

(only for EU countries)

- in observance of European Directive 2002/96/EC on

waste of electric and electronic equipment and its

implementation in accordance with national law,

electric tools that have reached the end of their life

must be collected separately and returned to an

environmentally compatible recycling facility

- symbol 0 will remind you of this when the need for

disposing occurs

DECLARATION OF CONFORMITY

• We declare under our sole responsibility that this product

is in conformity with the following standards or

standardized documents: EN 60745, EN 61000,

EN 55014, in accordance with the provisions of the

directives 2004/108/EC, 2006/42/EC

• Technical file at: SKIL Europe BV (PT-SEU/PJE), 4825

BD Breda, NL

ÊÆÇÎ¹Æ¼½ÊÄÇÇÌ

Á»½Ê½ËÁ¼½ÆÌ

È½Ê¹ÌÁÇÆËŵÆ¿ÁÆ½½ÊÁÆ¿

ÍÊÇÈ½Ɠˁ˅ʿ˂Ê½¼¹Ɠ

¹ÆÊÇÅÅ½Ä½Æ

ÈÈÊÇÎ¹Ä¹Æ¹¿½Ê

21.07.2011

NOISE/VIBRATION

• Measured in accordance with EN 60745 the sound

pressure level of this tool is 82 dB(A) and the sound

power level 93 dB(A) (standard deviation: 3 dB), and the

vibration 7,7 m/s² (hand-arm method; uncertainty K = 1.5

m/s²)

• The vibration emission level has been measured in

accordance with a standardised test given in EN 60745; it

may be used to compare one tool with another and as a

preliminary assessment of exposure to vibration when

using the tool for the applications mentioned

- using the tool for dierent applications, or with dierent

or poorly maintained accessories, may signicantly

increase the exposure level

- the times when the tool is switched o or when it is

running but not actually doing the job, may signicantly

reduce the exposure level

! protect yourself against the effects of vibration

by maintaining the tool and its accessories,

keeping your hands warm, and organizing your

work patterns

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Skil 7460 aa Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info