Bedienungsanleitung Skil 8040 (Seite 7 von 124) (Alle Sprachen)

758005

Zoom out

Zoom in

Vorherige Seite

1/124

Nächste Seite

not be made by children

without supervision

BEFORE USE:

• Check the functioning of the tool before each use and,

in case of a defect, have it repaired immediately by a

qualied person; never open the tool yourself

• Inspect tool cord and plug before each use and, if

damaged, have them replaced by a qualied person

• Use completely unrolled and safe extension cords with a

capacity of 16 Amps (U.K. 13 Amps)

• Never use the tool when the cord is damaged; it must

be replaced by the manufacturer, its service agent or

similarly qualied persons in order to avoid a hazard.

• Use the tool and its accessories in accordance with this

instruction manual and in the manner intended for the

tool; use of the tool for operations, dierent from those

normally expected to be performed by the tool, could

result in a hazardous situation

• Always check that the supply voltage is the same as the

voltage indicated on the nameplate of the tool

• Be sure tool is switched o when plugging in

DURING USE:

• Handle the tool with care; prevent re and burns

-do not touch the air outlet/nozzle and the heated object;

they become extremely hot

-do not hold the air outlet/nozzle too close to the object

to be worked on

-do not direct the hot air ow towards the same surface

for too long

-never look down the air outlet/nozzle

-wear protective gloves and use safety glasses

-never direct the hot air ow towards persons or animals

-never use the tool for drying hair

-do not leave the tool unattended

-never use the tool in the proximity of inammable gases

or combustible materials (risk of explosion)

-when working with plastic, paint, varnish and similar

materials, inammable and poisonous gases may

be produced; inform yourself beforehand about the

materials to be worked on

-take into account, that heat may be transferred to

combustible materials out of eyesight

-to be on the safe side, have a bucket of water or a re

extinguisher handy, in case any material catches re

• Prevent electrical shock

-never poke anything down the air outlet/nozzle

-avoid body contact with earthed surfaces (e.g. pipes,

radiators, ranges, refrigerators)

-ensure the tool does not get wet

-do not use the tool in damp locations

-when used outdoors, connect the tool via a fault

current (FI) circuit breaker with a triggering current

of 30 mA maximum, and only use an extension cord

which is intended for outdoor use and equipped with a

splashproof coupling-socket

• Handle the cord with care

-always keep away the cord from the hot air ow and the

air outlet/nozzle

-keep the cord away from heat, oil and sharp edges

-do not carry the tool by the cord, and do not yank the

cord to disconnect it from the socket

-do not suspend the tool by the cord

• Never use the tool in conjunction with chemical solvents

• Make sure work area is adequately ventilated

Heat gun 8020/8040

INTRODUCTION

• This tool is intended for the removal of paint, the forming

and welding of plastic, and the warming of heat-

shrinkable tubing; the tool is also suitable for soldering

and tinning, loosening adhesive joints and defrosting

water pipes

• This tool is not intended for professional use

• Read and save this instruction manual 3

TECHNICAL DATA 1

TOOL ELEMENTS 2

A On/o switch

B Buttons for setting temperature (8040)

C Buttons for setting air ow (8040)

D Display (LCD) (8040)

E Nozzle release ring

F Ventilation slots

G Glass protection nozzle

H Round nozzle

J Reector nozzle

K Reduction nozzle

L Air outlet/nozzle

M Dial wheel (8020)

N Button for memory storing (8040)

P Button for memory selection (8040)

SAFETY

GENERAL

• This tool can be used by

children aged 8 and above

and by persons who have

physical, sensory or mental

limitations or a lack of

experience or knowledge if a

person responsible for their

safety supervises them or has

instructed them in the safe

operation of the tool and they

understand the associated

dangers (otherwise, there is a

danger of operating errors and

injuries)

• Supervise children (this will

ensure that children do not play

with the tool)

• Cleaning and user

maintenance of the tool shall

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Skil 8040 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info