Bedienungsanleitung Skil 8700 (Seite 9 von 92) (Alle Sprachen)

758639

Zoom out

Zoom in

Vorherige Seite

1/92

Nächste Seite



Wet & Dry Vacuum cleaner 8700

INTRODUCTION

• This appliance is intended for the collection and

vacuuming of non-ammable liquids as well as

dry materials

• This appliance is intended for indoor use only and

suitable for industrial usage as required in hotels,

schools, hospitals, factories, shops, oces and

rental businesses

• This appliance is not suitable for vacuuming

hazardous dusts

• Read this instruction manual carefully before use and

save it for future reference 2

• Pay special attention to the safety instructions and

warnings; failure to follow the warnings and

instructions may result in electric shock, fire and/or

serious injury

• Check whether the packaging contains all parts as

illustrated in drawing 3

• When parts are missing or damaged, please contact

your dealer

TECHNICAL SPECIFICATIONS 1

APPLIANCE ELEMENTS 3

A Locking latch (2)

B Motor head

C Container

D Caster (4)

E Cartridge lter

F Vacuum hose

G Hose connection

H Extension tube (2)

J Airow control handle

K Floor brush nozzle

L Round brush nozzle

M Crevice nozzle

N On/o switch

P Universal power tool adapter

Q Airow regulator

R Cartridge lter protection

S Dust bag

T Foam sleeve lter

U Cable clip

V Ventilation slots

W Filter retainer

X HEPA Filter door

Z HEPA Filter

SAFETY

ELECTRICAL SAFETY

• Always check that the supply voltage is the same as the

voltage indicated on the nameplate of the appliance

(appliances with a rating of 230V or 240V can also be

connected to a 220V supply)

• Connect this earthed appliance only to a properly earthed

power supply system; ensure that socket and extension

cable have a functional protective conductor

• When operating the appliance in damp environments,

use a residual current device (RCD) with a triggering

current of 30 mA maximum

• Always disconnect plug from power source during work

breaks, when not in use or when working on the

appliance (e.g. changing/cleaning lters), in order to

prevent accidental starting

• Switch o the appliance before disconnecting the plug

• Do not use the appliance when the power supply cable,

plug or switch is damaged

• If the power supply cable is damaged while working, do

not touch it, but immediately disconnect the plug

• Do not drive over, crush or stretch the power supply cable

• Do not pull the power supply cable to disconnect the plug

or to move the appliance

• A damaged power cord shall be replaced at a SKIL

service centre only in order to avoid a hazard

PERSONAL SAFETY

• This appliance is not intended for use by persons

(including children) with reduced physical, sensory

or mental capabilities, or lack of experience and

knowledge, unless they have been given

supervision or instruction concerning use of the

appliance by a person responsible for their safety

• Ensure that children do not play with the appliance

• Never vacuum materials that contain asbestos

(asbestos is considered carcinogenic)

• Do not vacuum inflammable or explosive fluids

(such as gasoline, oil, alcohol, solvents)

• Do not vacuum explosive dusts (such as coal dust,

magnesium dust, grain dust)

• Do not vacuum toxic materials

• Never vacuum hot ashes or pointed/sharp objects

• Do not operate the appliance in rooms where the

danger of an explosion exists

• Provide for good ventilation at the working place

• If foam or liquid escapes from the appliance, switch

off immediately

• Never operate the appliance without the necessary lters

as described in this manual

• Do not leave the appliance unattended when plugged in

• Use extra care when cleaning on stairs

• Regularly check the proper condition of the vacuum hose

(when doing so leave the vacuum hose mounted to

prevent dust from coming out)

• Keep the ventilation slots uncovered during vacuuming

WHEN CONNECTING NEW 3-PIN PLUG (U.K. ONLY):

• Do not connect the blue (= neutral) or brown (= live) wire

in the cord of this tool to the earth terminal of the plug

• If for any reason the old plug is cut o the cord of this tool,

it must be disposed of safely and not left unattended

USE

• Assembly 3 4

! ensure that the plug is disconnected from the

power source before assembling the appliance

- unlock latches A and lift motor head B o container C

- remove contents from container and turn it

upside down

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Skil 8700 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info