Bedienungsanleitung Skoda BOLERO - 2012 (Seite 6 von 20) (Englisch)

678541

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

Incorrect code number

If an incorrect code is confirmed after entry of the code, the procedure can be re-

peated once again. The number of possible attempts is shown in the second line

on the touch-screen.

If the code number is entered incorrectly for the second time, the unit will be

blocked for approx. one hour. It is possible to enter again the safety code after

one hour has expired, when the unit and the ignition have been switched on.

If two invalid attempts are then made again, the system will be

blocked again for an hour.

The cycle - two attempts, blocked for an hour - will continue to apply.

Note

The code is normally stored in the instrument cluster. This ensures that it is auto-

matically decoded (convenience coding). Manual input of the code is normally not

necessary.

General - operation

The screen of the unit is a so-called “touch-screen”. Fields circled in colour on the

touch-screen are presently “active” and are operated by touching the screen. Ac-

tive fields, which call up a function or a menu, are called “function keys”.

Moving objects or regulators

›

Place your finger on the display of a moving object on the touch-screen, for ex-

ample the “sliding regulator” in a “scrollbar”.

›

Now move your finger over the touch-screen without interruption. The object

will follow your movements, but can only be moved within the pre-defined

range.

›

Lift the finger from the touch-screen at the desired position.

›

To view the displayed menu section, move the right sliding regulator in the

scrollbar completely to the bottom.

›

Alternatively, you can move the sliding regulator on the touch-screen to the

bottom and top by touching the function keys



and



›

A sliding regulator in a set-up bar  can alternatively be moved by pressing

“Return to previous menu item”

Return to the previous menu with



“Scrollbar”

The vertical bar on the right side of the display with a sliding regulator between

the arrow keys



and



is called a “scroll bar”. It indicates that further menu en-

tries become visible if the sliding regulator is moved completely to the bottom.

“Set value”

In a set-up menu a set-up or value is infinitely adjustable. Move the sliding regu-

lator  or press

to change a setting.

“Pop-up window”

A function key with an arrow  behind another function key shows the presently

selected set-up, e.g. with an

Acoustic feedback

Off

If you press on the function key

 Off

on the display, a so-called “pop-up window”

will open where all the set-up options are displayed.

Briefly press the desired set-up option. The pop-up window is closed and the set-

ting you have selected is displayed. To close the pop-up window without chang-

ing the set-up, press the function button in the pop-up window



“Check box”

There is a so-called “Check box” in front of a function which can only be switched

on or off. A tick in the check box  indicates that the function is switched on, an

empty check box , indicates that it is switched off.

Briefly press the corresponding function key for switching on or off.

General information

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Skoda BOLERO - 2012 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Skoda BOLERO - 2012

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info