Bedienungsanleitung Skoda BOLERO - 2012 (Seite 8 von 20) (Englisch)

678541

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

Save a radio station on a displayed station key

›

Continue to press one of the six station keys

1 ...

6 ...

displayed in the RADIO

main menu until a signal tone sounds. The currently heard radio station is then

stored on this station key.

Deleting a radio station from the memory list

›

In the RADIO main menu, press the function key

Presets

to open the memory

list.

›

Press the function key

Delete

behind the station you wish to delete.

›

Confirm the following safety interrogation by pressing the function key

Delete

to finally remove the station from the memory list.

If the currently heard radio station is already saved in the preset list, the memory

space number is displayed behind the description of the frequency range (FM or

AM).

Use the Setup radio main menu, to determine which of the six station keys are to

be displayed in the main menu RADIO.

Function SCAN

The stations of a waveband can be played briefly one after the other (for ten sec-

onds).

›

Press the set button

, the radio searches automatically all available stations

of the current waveband.

›

Alternatively, press the function key

Extras

and press

Scan

in the opening pop-

up window.

›

During the current automatic play the function key will change from

Extras

 Scan

›

Press the set button

or function key

 Scan

again to end the automatic play

of the currently heard radio station.

RDS functions

Switching radio text on and off

›

In the RADIO main menu, press the function key

Extras

and then the function

key

Radio text

. Instead of the six station keys, the window for displaying the ra-

dio text is now opened in the lower half of the display.

›

The window for displaying the radio text must fade out again to enable the sta-

tion keys to be displayed again. Briefly press on the display window of the radio

text.

›

Alternatively, press the function key

Extras

and the function key

Radio text

shown as highlighted in the opening pop-up window.

RDS (“Radio Data System”) serves to transmit program identification and addi-

tional services therefore also enabling automatic tracking of stations.

In the event of sufficiently satisfactory reception, the suitable RDS radio stations

will display the station name instead of the station frequency.

If a radio station sends additional information via the RDS function while a station

is being stored, it can occur that the name of the radio station is later displayed

incorrectly in the preset list.

Traffic information function

›

Press on the button

, in order to switch the traffic information function on or

off.

The display “TP” in combination with a station name (e.g. in the station or preset

list), indicates a traffic programme station.

Irrespective of which radio station is heard, an additional receiver part in the unit

ensures that a traffic programme station can always be received as long as the

traffic programme function is switched on.

The operational readiness of the traffic information function is indicated by “TP”

at the top right in the display.

If no traffic programme station can be received because, for example, radio recep-

tion is interrupted in general, “No TP” will be displayed instead of “TP”. Remem-

ber that car parks, tunnels, high buildings or mountains can interrupt the radio

signal up to the total loss of reception.

Incoming traffic announcement

When a traffic announcement is being received, a pop-up window will open.

If you wish to interrupt the transmission of the traffic announcement, press on

the function key

Cancel

in the pop-up window Traffic announcement. The traffic

programme function remains available and a following traffic announcement is

made again while the audio mode is in operation. Pressing the function key

Deact. TP

will switch off the traffic programme function permanently.

Basic setting

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Skoda BOLERO - 2012 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Skoda BOLERO - 2012

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info