Bedienungsanleitung Skoda BOLERO - Yeti (Seite 16 von 24) (Englisch)

530445

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

Basic setting14

• If an external audio source is connected via AUX-IN, which is equipped with an

adapter for external power supply, it can occur that the audio signal is interrupted.

This depends on the quality of the adapter which is used.

• The loudspeakers in the vehicle are matched to a power output of the radio of

4x20 W.

• For the equipment sound system*, the loudspeakers are matched to a power

output of the amplifier of 4x40°W + 6x20 W.

Range selector key SETUP

Main Setup set-ups (Setup)

– Press the range selector key to open the main Setup Setups.

– Select the area for which you wish to change the set-ups or carry out

set-ups by pressing on your selection.

– Press on the function key , to switch back to the last selected Setup.

Overview of the set-up Setups

- When in the radio mode, carry out set-ups for the function of the arrow

keys, for the displayed memory keys, the memory list and the traffic reports.

- Determine the set-ups for the play and display of MP3 data and activate

or deactivate the external audio sources.

- Change the system set-ups such as voice response and time and cancel

or delete stored set-ups in individual areas.

- Select preferred TMC station and determine the area for TMC

announcements.

- Adjust the brightness of the screen and select/deselect the confirmation

tone for the keystroke.

- Update the phone book in the unit, delete all call lists and modify the

assignment of the shortcut keys.

Setup Radio

Call up the Setup Setup Radio by pressing the selector key and the

function key . Press on the function key or on the func-

tion key to determine from which list in the radio mode the

stations are to be selected with the arrow keys. If the is

selected, only stored stations from the memory list are called up.

“Memory” is displayed at the top left in the main Setup RADIO.

Select station keys for display

– Press on the function key behind the function key in the

Setup Setup Radio.

– In the pop-up window, press and select the station keys to be

displayed in the main Setup RADIO.

Switching the RDS function on or off (RDS regional)

– Press on the function key and select a set-up in the

opening pop-up window.

– Press on the function key , doing so will always choose the

frequency for the radio station heard, which offers the best reception

at the present time.

– When pressing on the function key , the unit attempts to hold a

radio station emitting regionally long enough until the reception

quality is so bad, that there is a risk of a program loss.

Delete memory list

– In the Setup Setup Radio move the sliding regulator to the bottom to

display the function key .

– Press the function key and confirm the following

safety interrogation in order to erase all radio stations stored in the

memory list.

SETUP



Radio

Media

System

Traffic program

Display

Phone

SETUP

Radio Station list

Memory list

Station keys

RDS regional

Automatic

Fix

Delete memory list

s3p4.a.book Page 14 Friday, March 13, 2009 3:04 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Skoda BOLERO - Yeti Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info