Bedienungsanleitung Skoda BOLERO - Yeti (Seite 17 von 24) (Englisch)

530445

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

Basic setting 15

Traffic station set-ups

Call up the TIM Setup recording time Setup by pressing the range selector

key and the function key .

– Press on the left of the display on TIM recording time, in order to open

the Time setting Setup.

–In the Time setting Setup, briefly press on the arrow keys or on

the display, below the display of the hours or minutes, in order to

gradually change the respective time unit down or up.

– Keep pressing the corresponding arrow key, in order to continuously

change the time unit. Release the button if the desired value has been

reached.

– Press on the function key in order to take over the indicated TIM

recording time and to exit the Setup Time setting.

– In this way you can set both desired TIM recording times.

– Activate or deactivate the desired TIM recording time by pressing the

function key . If the check-box is active

 the accompanying

TIM recording time is activated.

The unit starts with the recording 90 minutes before the set start time and ends the

recording 30 minutes afterwards.

Setup Media

Call up the Setup Media Setup by pressing the range selector key

and the function key .

Function keys in the Setup - Setup Media

- for playback of an external audio source.

- enables a wireless transfer of MP3 data from the Phone

preinstallation.

- according to the set-ups the title and performer

name or only the data and folder name will be displayed for audio CDs with CD

texts and in the MP3 operation.

- plays all MP3 data one after the other

according to the sequence on the played medium, which are stored in the folders

and sub-folders.

- the input sensitivity of the AUX-IN input for adjusting the play

function volume of a connected external audio source can be adapted to other

audio sources in three steps. Press on the function key and select

the desired input sensitivity in the opening pop-up window. If a MDI input is addi-

tionally installed, this setting also applies for the audio sources which are

connected to this input.

System set-ups

Call up the Setup System Setup by pressing the range selector key

and the function key .

Change the system language manually

– Press on the function key and select the desired

language in the opening pop-up window. The system language is

normally preset to the set language in the instrument cluster

“Automatic”. If desired, another language can be selected for the

radio as described.

Resetting the factory settings on the unit

– Press on the function key .

– Confirm the following safety interrogation, the unit will be reset in the

as-delivered condition and all the stored data will be erased.

Rear lighting of the control buttons

– Press on the function key .

SETUP Traffic information

 



Active

SETUP

Media

Activate AUX input

Activate Bluetooth audio

Deactivate performers/Title names

Scan/Mix/Repeat including sub-folder

AUX Input level

SETUP

System

System language

Factory settings

ILLUMINATION

s3p4.a.book Page 15 Friday, March 13, 2009 3:04 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Skoda BOLERO - Yeti Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info