Bedienungsanleitung Skoda Yeti - 2013 (Seite 13 von 225) (Englisch)

617590

Zoom out

Zoom in

Vorherige Seite

1/225

Nächste Seite

The following will be displayed in the information display for 10 seconds:

Service in ... km or ... days.

Resetting Service Interval Display

It is only possible to reset the Service Interval Display, if a service message or at

least a pre-warning is shown in the instrument cluster display.

We recommend that this reset is completed by a ŠKODA specialist garage.

The ŠKODA specialist garage:

›

Resets the memory of the display after the appropriate inspection

›

Adds an entry to the Service Schedule

›

Affixes the sticker with the entry of the following service interval to the side of

the dashboard on the driver's side

Reset the service interval display by using the reset button

» Fig. 2 on page 8.

On vehicles which are equipped with the information display, you can reset the

Service Interval Display in the menu Settings » page 16.

CAUTION

We recommend that you do not reset the Service Interval Display yourself as this

can result in the incorrect setting of the Service Interval Display, which can also

cause possible problems with the operation of your vehicle.

Note

■

Never reset the display between service intervals, as this will result in the incor-

rect display.

■

Information is retained in the Service Interval Display even after the vehicle bat-

tery is disconnected.

■

If the instrument cluster is exchanged after a repair, the correct values must be

entered in the counter for the Service Interval Display. This work is carried out by

a ŠKODA specialist garage.

■

After resetting the display with flexible service intervals, the displayed data is

the same as that for a vehicle with fixed service intervals. We therefore recom-

mend that the Service Interval Display is only reset by a ŠKODA Service Partner,

who will reset the display with a vehicle system tester.

■

For more information on the service intervals » Service Plan.

Digital clock

First read and observe the introductory information and safety warn-

ings on page 8.

The clock is set with the buttons

and

» Fig. 2 on page 8.

Select the display that you wish to change with the button

and carry out the

change with the button

On vehicles that are fitted with the information display, it is also possible to set

the clock in the menu Time » page 16.

Recommended gear

Fig. 4

Recommended gear

First read and observe the introductory information and safety warn-

ings on page 8.

The currently engaged gear

is shown in the instrument cluster display » Fig. 4.

In order to minimise the fuel consumption, a recommendation for shifting into an-

other gear is indicated in the display.

If the control unit recognises that it is beneficial to change gear, an arrow

shown in the display. The arrow points up or down, depending on whether you

should shift into a higher or lower gear.

At the same time, the recommended gear is indicated instead of the currently en-

gaged gear

Instruments and Indicator Lights

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Skoda Yeti - 2013 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Skoda Yeti - 2013

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info