Bedienungsanleitung Skoda Yeti - 2013 (Seite 15 von 225) (Englisch)

617590

Zoom out

Zoom in

Vorherige Seite

1/225

Nächste Seite

Total-trip memory (memory 2)

The total-trip memory gathers data from any number of individual journeys up to

a total of 19 hours and 59 minutes driving or 1 999 kilometres driven, and on vehi-

cles which are fitted with an information display up to a total of 99 hours and

59 minutes driving or 9 999 kilometres driven. The memory is deleted when ei-

ther of these limits is reached and the calculation starts all over again.

Unlike the single-trip memory, the total-trip memory is not deleted after a period

of interruption of driving of 2 hours.

Note

All information in the memory 1 and 2 is erased if the battery of the vehicle is dis-

connected.

Operation

Fig. 6 Multifunction display: Control elements on the windscreen wiper lev-

er/control elements on the multifunction steering wheel

First read and observe the introductory information and safety warn-

ings on page 12.

The rocker switch

» Fig. 6 and the button

are located on the windscreen

wiper lever. Switching over and resetting is performed with the adjustment wheel

on the multifunction steering wheel.

Select memory

›

Press the button

» Fig. 6 or

Selecting functions using the windscreen wiper lever

›

Briefly press the rocker switch

» Fig. 6 up or down. This opens the individual

functions of the multifunction display one after the other.

Selecting functions using the multifunction steering wheel

›

Press the button

» Fig. 6 to open the menu of the multifunction display.

›

Turn the adjustment wheel

upwards or downwards. This opens the individu-

al functions of the multifunction display one after the other.

Reseting

›

Select the desired memory.

›

Press and hold the button

» Fig. 6 or

for a short while.

The following readouts of the selected memory will be set to zero with the but-

ton

›

Average fuel consumption

›

Distance driven

›

Average speed

›

Driving time

Multifunction display details

First read and observe the introductory information and safety warn-

ings on page 12.

Outside temperature

The current outside temperature is shown in the display.

If the outside temperature drops below +4 °C, a snow flake symbol (warning sig-

nal for ice on the road) appears before the temperature indicator and an audible

signal will sound. After pressing the rocker switch

» Fig. 6 on page 13 or the

button

, the function shown last is indicated.

Driving time

The driving time which has elapsed since the memory was last erased, appears in

the display. If you wish to measure the driving time from a particular time, you

need to set the memory to zero at this point in time by pressing the button

» Fig. 6 on page 13 or the adjustment wheel

for more than 1 second.

The maximum time indicated in both memories is 19 hours and 59 minutes and on

vehicles which are fitted with an information display, it is 99 hours and 59 mi-

nutes. The indicator is set back to zero if this period is exceeded.

Instruments and Indicator Lights

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Skoda Yeti - 2013 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Skoda Yeti - 2013

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info