Operating safety
G
WARNING
Work improperly carried out on electronic
components and associated software could
cause them to cease functioning. Because
the vehicle’s electronic components are
interconnected, any modifications made
may produce an undesired effect on other
systems. Electronic malfunctions could
seriously impair the operating safety of
your vehicle.
See an authorized electric drive smart
center for repairs or modifications to
electronic components.
Improper work or modifications on other
vehicle systems could also have a negative
impact on the operating safety of the
vehicle.
G
WARNING
Some safety systems only function while the
drive system is switched on. You should
therefore
never switch off the drive system
while driving.
G
WARNING
A vehicle with an electric motor produces
significantly lower noise levels than a
vehicle with a combustion engine. Other
motorists
or pedestrians, especially those
who are visually or hearing impaired, may
be unable to hear your vehicle while it is
in motion. This is particularly true when
driving at lower speeds and during parking
maneuvers. At all times, it is the
responsibility of the driver to be aware of
their surroundings, especially in these low
speed situations. Otherwise other road
users could be seriously or fatally injured.
Vehicles with a warning signal for
pedestrians * emit an acoustic signal when
the vehicle speed is below 20 mph
(30 km/h). Thus, your vehicle will be better
noticed by other road users at low speeds.
G
WARNING
Heavy blows against the vehicle underbody
or tires/wheels, for example when running
over an obstacle, road debris or a pothole,
may cause serious damage and impair the
operating safety of your vehicle.
If you feel a sudden significant vibration
or ride disturbance, or you suspect that
damage to your vehicle has occurred, you
should turn on your hazard warning
flashers, carefully slow down, and drive
with caution to an area which is a safe
distance from the road.
Inspect the vehicle underbody and tires/
wheels for possible damage. If the vehicle
appears
unsafe, have it towed to the nearest
authorized electric drive smart center or
other maintenance or repair facility that
is qualified to work on smart electric
vehicles for further inspection or repairs.
Danger of electric shock
The components of the drive system are
indicated
by yellow warning labels to make
you aware of high voltage.
High‑voltage cables are orange‑colored.
G
WARNING
Due to the high-voltage technology,
electrical leads under high voltage are
installed in the vehicle. For this reason,
work on the vehicle may only be carried out
by specially trained technicians.
>> Introduction.
15
* optional
Z
