99
Using the pyro-clean programme
1) Carrying out an immediate pyrolysis cleaning session
a) Remove any accessories from the oven and wipe off any excess grime.
b) Check that the programmer displays normal time and that it is not flashing.
c) Press the program selection button until the "Pyro-clean" programme appears.
Your oven has 3 pyrolysis symbols that
correspond to 1 two-hour pyro (Non-adjustable).
You can select two other non-adjustable cycles
( 1:45, or 1:30) non-adjustable, by
pressing the - or +.
The oven cannot be used for 2:00, 2:15 or
2:30 respectively after each cleaning cycle.
These times allow for cooling down, after which
the door is automatically unlocked.
d) Press the START/STOP button
- The door is locked during pyro-cleaning
(after about 2 minutes).
- You can consult the finishing time for
the pyro-clean cycle by pressing button . At
the end of pyro-cleaning, the symbol
remains lit until the door is automatically unlocked.
e) Stop the oven by pressing the START/STOP button.
f) Use a damp cloth to remove white ash after the oven has cooled down.
The oven is now ready for use.
Note: The pyro-cleaning temperature cannot be altered. During the cleaning cycle, the light
is off. If your oven is still not clean after pyro-cleaning, it means that you have delayed
cleaning too long. Repeat the pyro-clean programme.
Never hang household linen (towels, dishcloths, etc.) on the oven door
handle.
During the cleaning cycle, accessible surfaces become much hotter than
during normal cooking. Keep children at a distance.
GB
