77271
7
Zoom out
Zoom in
Vorherige Seite
1/17
Nächste Seite
Operation
GB
23
Operating the buttons
The controls described here expect the pressing of a (selection) button
to be
followed
by the pressing of a subsequent button.
The pressing of a subsequent button must always
commence within
10 seconds
, otherwise the selection will be deleted.
The plus and minus buttons can be touched individually or be permanently
pressed.
Switching on the hob and cooking zones
1.
Press the on/off button
until the power setting displays indicate 0.
The stand-by dots will blink. The controls are ready for operation.
2. Then press a
cooking zone selection button
(e.g. for front left). The
stand-by dot of the cooking zone selected will light up.
3. Use the
plus button
or
minus button
to select a cooking level.
The plus button will activate power setting 1 and the minus button power
setting 9.
4. Put a
metal cooking pot
onto the cooking zone. The pan recognition
device will activate the induction coil.
As long as no metal cooking pot is placed onto the cooking zone, the dis-
play will alternate between the power level set and the symbol . If no
pot is placed on the cooking zone it will switch off after 10 minutes for rea-
sons of safety. Please refer to the section on “Pan recognition” .
Repeat items 2 to 4 in order to cook on other cooking zones at the same time.
Switching off a cooking zone
5. The stand-by dot of the cooking zone selected must light up. It may be
necessary to press the
cooking zone selection button
.
6. a) Press the
minus button
several times until the power setting
display shows 0, or
b) press the
minus button
and
the plus button
once at the same
time. The cooking zone is switched off direct irrespective of the power
setting or
c) press the
on/off button
. The entire hob will be switched off (all of
the cooking zones are switched off).
Switching off the hob
7. Press the
on/off button
. The hob will be completely switched off,
irrespective of any settings.
Suitable for induction cooking
Cooking zone selection buttons Stand-by dot
7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Smeg SE 2931 ID wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Smeg SE 2931 ID

Smeg SE 2931 ID Bedienungsanleitung - Deutsch - 17 seiten

Smeg SE 2931 ID Bedienungsanleitung - Holländisch - 17 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info